Volume 13, Issue 5 (English article specials 2019)                   2019, 13(5): 59-92 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Firuzi M, Ghobadi M H, Noorzad A, Dadashi3 E. Analysis of a Large-Scale Landslide Using Shear Strength Reduction Factor Method, Case Study: Manjil Landslide. Journal of Engineering Geology 2019; 13 (5) :59-92
URL: http://jeg.khu.ac.ir/article-1-2745-en.html
1- , firuzi.mahnaz@yahoo.com
Abstract:   (3925 Views)
Slope stability could be a major concern during the construction of infrastructures. This study is focused to analyze the slope stability of Manjil landslide that was located 41+400 to 42+200 km along Qazvin-Rasht freeway, Iran. The Manjil landslide, which had 168 m long and approximately 214 m wide, was occurred due to inappropriate cutting in June 2013 and led to destructive and closure of freeway. Slope stability analysis was carried out using a finite element shear strength reduction method (FE-SRM). The PHASE2D program was utilized in order to model the slope cutting and stability of landslide. Slope angle was flatted with 3H:2V geometry and stabilized with piling. The results indicated safety factors of 1.95 and 1.17 in the static and pseudo-static states, respectively, while the maximum bending moment with single pile (SP) in the pseudo-static state was 5.69 MN. Maximum bending moment of the pile around the slip surface was significantly large and more than the bending moment capacity of the pile. Due to the large bending moment on the pile, pile-to-pile cap connections (two pile group: 2PG) should be designed at the toe of the slope. The obtained results showed reduction of this parameter to 2.48 MN. Thus, it can be concluded that 2PG is a suitable stabilization method for the Manjil landslide.
Full-Text [PDF 1565 kb]   (862 Downloads)    
Type of Study: Original Research | Subject: En. Geology
Received: 2018/01/17 | Accepted: 2019/01/2 | Published: 2020/06/9

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb