Volume 18, Issue 2 (Summer 2024)
2024, 18(2): 186-213 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Esfahanizadeha M, Davoodi M, Haghshenas E, Jafari M K. Determining shallow subsurface geological structure using geophysical methods; case study of Abasabad site. Journal of Engineering Geology 2024; 18 (2) :186-213
URL: http://jeg.khu.ac.ir/article-1-3124-en.html
URL: http://jeg.khu.ac.ir/article-1-3124-en.html
1- Islamic Azad University.Tehran
2- International Institute of Earthquake Engineering and Seismology ,davoodi.iiees@gmail.com
3- International Institute of Earthquake Engineering and Seismology
2- International Institute of Earthquake Engineering and Seismology ,
3- International Institute of Earthquake Engineering and Seismology
Abstract: (812 Views)
The determination ofgeological subsurface strata and shear wave velocity profiles is one of the most important engineering measures for seismic design and site effects studies. Recently, the use of seismic geophysical methods in engineering geological studies for this purpose has become widespread. In this paper, the accuracy and efficiency of seismic geophysical methods with active and passive seismic source in determining the subsurface geological structure of a selected site in the city of Abasabad in northern Iran have been studied. To this end, first, by conducting several exploratory boreholes, the subsurface geological structure of the study site up to a depth of 70 meters was carefully determined using engineering geological experiments. The results of this section showed that the shallow sediments of Abasabad site are mainly composed of sandy soils with four separate geological layers. In the next step, in two other separate boreholes, seismic geophysical experiments with active source of down-hole test were performed in order to accurately determine the shear wave velocity profile in different layers. In addition, in the next phase, using the array microtremor recording method, which is a new seismic geophysical method of passive-source type, to determine the subsurface geological structure of the study site in the form of shear wave velocity profiles. It should be noted that the array microtremor recording was performed using fifteen different arrangements of receptors (with different numbers and distances of receptors) and by two analyzing methods including F-K and SPAC. The results of these studies showed that both active and passive seismic geophysical methods had acceptable performance in determining the subsurface geological stratification of the site. It also could be inferred that the down-hole test with high accuracy determines the shear wave velocity in each layer compared to the array microtremor method but requires artificial production of seismic waves and borehole drilling. Array microtremor method without the need for drilling and production of artificial seismic waves has high efficiency in determining the subsurface layering and estimating the shear wave velocity of each layer and in general the results of this paper showed that in estimating the shear wave velocity compared to down-hole method shows up to 10% error.
Type of Study: Original Research |
Subject:
Geotecnic
Received: 2024/07/11 | Accepted: 2024/09/20 | Published: 2024/09/21
Received: 2024/07/11 | Accepted: 2024/09/20 | Published: 2024/09/21
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
