Showing 50 results for Zad
Aylar Hosniyeh, Dr Rouzbeh Dabiri, Alireza Alizadeh Majdi, Elnaz Sabbagh,
Volume 16, Issue 4 (Winter 2022)
Abstract
Silty soils containing sodium content, known as salty silty soils, are classified as another type of problematic soil. When this type of soil comes into contact with water, it can swell and diverge, leading to settlement and deformation. Considering that a significant part of the Urmia Lake basin and the Tabriz plain consists of sodium-rich fine soils, the aim of the project is to improve the quality of the soils. Therefore, one of the main objectives of this study is to assess the sediments within the lake bed in order to reduce erosion and to evaluate the possibility of improving and stabilizing the sodium saline silty soils in the area using the geopolymerization technique. To achieve this, pumice material with pozzolanic properties was separately mixed with the soil under investigation at weight percentages of 3%, 5% and 7%, together with a calcium hydroxide solution as a catalyst at concentrations of 2%, 5% and 7%. The samples were then cured for one day. Laboratory tests, including compaction, uniaxial compressive strength, direct shear, and consolidation, were carried out to evaluate the geotechnical behavior of the improved soil. The results obtained indicate that the combination of 3% pumice with 2% calcium hydroxide increased the uniaxial compressive strength of the stabilized sample by 1.32 times after one day of curing. In addition, the mixture of 7% pumice with 2% calcium hydroxide significantly improved the internal friction angle by 20 times. Finally, the combination of 7% pumice with 2% calcium hydroxide reduced the value of free swelling potential by up to 86%.
Khadijeh Kord, Heeva Elmizadeh, Hakimeh Amanipour,
Volume 17, Issue 1 (Spring 2023 2023)
Abstract
The study area is a part of the Dez River Basin, which is located in the central part of the basin. In this area, due to the climatic conditions, the irregular availability in terms of time and space, the increasing use of water resources and surface water resources, there is a great dependence on the underground water of the region. The main objective of this research is to investigate the factors influencing the fluctuations of the water level in the Dezful-Andimeshk plain during a statistical period of 20 years. For this purpose, using piezometric well level data and well logs of the study area in WinLog software, maps of the groundwater level and the bottom level of reservoir were prepared using theIDW method. The results of the research showed that the greatest drawdown occurred in north-eastern, south-eastern and western parts of the study area. Asthe amount of precipitation, evaporation and temperature are high in this part, one of the reasons for the decline in these parts can be attributed to the climatic factors of the region. Other factors in the decline of the reservoir level are the main river channel and the high slope of the area. Comparing the changes in the reservoir level with the flow of the Dez River showed that there is a high correlation between the changes in these two parameters with a time interval of one year. Therefore, according to agricultural activities, these limited resources should be harvested, scientifically and fundamentally, the region will be at risk of a serious water crisis in the future.
- Fatemeh Khalooei, - Heeva Elmizadeh,
Volume 17, Issue 2 (Summer 2023)
Abstract
In this study, images from the Sentile 2 satellite have been used. In the study, the proximity of the images was taken into account to minimize the error due to changes in gray scale. Also in this study, GIS and remote sensing data and SNAP software were used as tools.According to the subsidence zones obtained in the study area, it is observed that the maximum amount of subsidence around the tomb of Sheikh Mohammad is between 80-90 mm per year of landslide. The results show that the highest rate of subsidence in the study area is due to agricultural use and irrigated agriculture in the region. This problem may be mainly related to the issue of groundwater extraction for agriculture and drinking, and possibly other factors such as geology and tectonics. The centralization of the maximum rate of subsidence in residential areas has led to relatively insecure living conditions for the inhabitants and increased their vulnerability to land hazards. Also, considering the results of the steps taken to study the phenomenon of land subsidence in the study area, it is concluded that the phenomenon of land subsidence has a significant relationship with the grain size and with the lowering of the water table. Therefore, the combination of radar interference methods with high spatial resolution with high spatial resolution, satellite positioning systems with high temporal satellite positioning systems with high temporal resolution, and precise alignment with very high accuracy, is a good way of to study the movement of the earth's surface.
Hossein Mohammadzadeh, Vahid Naseri Hesar, Hamid Ghalibaf Mohammadabadi,
Volume 17, Issue 4 (Winter 2023)
Abstract
Due to the complex hydrogeology of karst areas, the sealing of dams in such areas is more difficult, time-consuming and expensive, and the possibility of water leaksge is higher. After the dewatering of the Gharetikan dam and appearance of downstream springs and the leakage of water from the abutment of the Tirgan limestone formation, the possibility of karst development is considered to be the most important problem of this dam. In this article, the potential of karst development in the area and supports of the Gharetikan Dam has been studied by carrying out geological studies, structural geology and joint studies, geotechnical permeability and analysis hierarchy method (AHP).. The results show that about 14.6% of the Gharetikan dam area has a high potential for karst development. The area of Gharetikan dam area is affected by the Sarroud fault zone system, which has caused the collapse of the left side of the dam axis. The joint studies in the abutment of Gharetikan dam show three main types of joints. Two groups of joints are located at the intersection with the dam axis and the slope of the other group of joints is towards the dam basin. The investigating of Lugeon permeability tests in the dam construction shows that the highest permeability can be seen in the left abutment with turbulent flow, and then under the river bed with linear and turbulent flow, but there is no permeability in the right abutment. And the flow is mostly linear. According to the structural-conceptual model prepared from the location of the Gharetikan dam, to the location of the dam axis in the Sarroud fault system, and the amount opening and the slope direction of the joints in each station, it is expected that the amount of water leakage and escape and the possibility of karst development from the left side and the bed of the dam will be more than the right side of the dam.
Hossein Ebrahimi, Farzad Akbari, Soroor Mazrae Asl, Babak Biglari,
Volume 17, Issue 4 (Winter 2023)
Abstract
The Vorskharan karst spring with a catchment area of 50 square kilometers and an average discharge of about 1.35 m2/s is one of the most important springs in the city of Firouzkouh. In order to asses the hydrogeological and hydrogeochemical charachteristics of the spring, the physical and chemical properties of the spring water were measured and analyzed for several months. The results showed that the recession curve of the spring has a slope and the value of its coefficient is about 0.003. The low coefficienof the discharge variation t, electrical conductivity and major ions, as well as the single slope of the spring’s recession curve , are mainly due to the elongated shape of the aquifer and the long-term presence of snow in the catchment basin of the spring. Considering the relatively high water level of the spring and the existence of a sinkhole and a polje in the spring’s catchment area, as well as the coefficient of small changes in the physical and chemical parameters of the spring, it can be said that the dominant flow system in the aquifer which recharges Vorskharan spring,is conduit-diffusive. According to the field studies and the evaluation of the percentage of soil cover, the development of dissolved spaces and other morphological effects of karst, the percentage of annual recharge in the catchment area was estimated at 56%. With the amount of precipitation, the percentage of annual recharge, the annual recharge volume of the preliminary water catchment basin equal to 19.2 MCM and the annual discharge volume of the spring through the annual hydrograph of the spring was calculated to be equal to 20.1 MCM. It was also observed that the type of water is Ca-HCO3, and the lithology of the aquifer is calcareous and dolomite.
Miss Sooror Mazraeasl, Mr Farzad Akbari, Ms Elahe Iraniasl, Miss Leila Hosseini Shafei,
Volume 18, Issue 1 (Spring 2024)
Abstract
Groundwater is one of the main sources of water supply for agriculture, drinking and industry in Iran, especially in areas with arid and semi-arid climates. Therefore, due to the high importance of groundwater resources, it is necessary to know the hydrodynamic parameters in order to determine the natural flow of water and manage the optimal utilization of groundwater resources. Considering the role of the Daloon-Meydavood aquifer in providing part of the water needed in the study area, especially for agricultural purposes, the hydrodynamic parameters of this aquifer were estimated using the methods of grain size analysis, geophysics and pumping test. The parameters were calculated by all three methods and validated using the flow rate of the exploitation wells. In all three methods, the hydrodynamic parameters (Hydraulic conductivity, Specific yeild, transmissivity coefficient) are the highest in the north and northeast and the lowest in the south and northwest. The results showed that 2 methods including grain size analysisand pumping test had the most similarity with the discharge map of the exploitationwells.
Dr Mehran Esfahanizadeha, Dr Mohamad Davoodi, Dr Ebrahim Haghshenas, Dr Mohamad Kazem Jafari,
Volume 18, Issue 2 (Summer 2024)
Abstract
The determination ofgeological subsurface strata and shear wave velocity profiles is one of the most important engineering measures for seismic design and site effects studies. Recently, the use of seismic geophysical methods in engineering geological studies for this purpose has become widespread. In this paper, the accuracy and efficiency of seismic geophysical methods with active and passive seismic source in determining the subsurface geological structure of a selected site in the city of Abasabad in northern Iran have been studied. To this end, first, by conducting several exploratory boreholes, the subsurface geological structure of the study site up to a depth of 70 meters was carefully determined using engineering geological experiments. The results of this section showed that the shallow sediments of Abasabad site are mainly composed of sandy soils with four separate geological layers. In the next step, in two other separate boreholes, seismic geophysical experiments with active source of down-hole test were performed in order to accurately determine the shear wave velocity profile in different layers. In addition, in the next phase, using the array microtremor recording method, which is a new seismic geophysical method of passive-source type, to determine the subsurface geological structure of the study site in the form of shear wave velocity profiles. It should be noted that the array microtremor recording was performed using fifteen different arrangements of receptors (with different numbers and distances of receptors) and by two analyzing methods including F-K and SPAC. The results of these studies showed that both active and passive seismic geophysical methods had acceptable performance in determining the subsurface geological stratification of the site. It also could be inferred that the down-hole test with high accuracy determines the shear wave velocity in each layer compared to the array microtremor method but requires artificial production of seismic waves and borehole drilling. Array microtremor method without the need for drilling and production of artificial seismic waves has high efficiency in determining the subsurface layering and estimating the shear wave velocity of each layer and in general the results of this paper showed that in estimating the shear wave velocity compared to down-hole method shows up to 10% error.
Dr Sasan Motaghed, Dr Marzieh Shamsizadeh, Dr Nasrolla Eftekhari,
Volume 18, Issue 3 (Autumn 2024)
Abstract
In this study, we present the Seismic Hazard Possibility Space (SHPS) for the city of Ahvaz. To achieve this, we applied the intuitionistic fuzzy method to weigh the logic tree used in the hazard analysis and constructed the SHPS based on expert opinions regarding the degrees of membership and non-membership. Hazard disaggregation was performed by through the concept of intuitionistic fuzzy sets, leading to the development of an intuitionistic fuzzy of an Intuitionistic Fuzzy Logic Tree (IFLT). The SHPS includes both the degree of membership and non-membership for pathways contributing to hazard generation. The SHPS illustrates the acceptance, non-acceptance, and ambiguity associated with potential hazard values from an expert perspective, thus assisting analysts in selecting appropriate hazard values. According to the numerical results of our analysis in the Ahvaz region, the seismic hazard is located in an uncertainty (unacceptability) zone, indicating that experts have low confidence in the results of the probabilistic seismic hazard analysis (PSHA) for Ahvaz. In addition, the hazard is characterized by an "unconfident zone". This finding indicates that experts are fairly confident in the results of the analysis for Ahvaz. This finding implies that the models and parameters used in the PSHA for this region are not accepted by experts, and further efforts are needed to identify or develop appropriate models and accurate parameters specific to the area. In conclusion, this research demonstrates how intuitionistic fuzzy sets can be used to construct SHPS, providing a novel framework for quantifying uncertainty and expert opinion in hazard assessment.
Mr. Farhad Mollaei, Dr. Reza Mohebian, Dr. Ali Moradzadeh,
Volume 18, Issue 3 (Autumn 2024)
Abstract
The brittlenessindex is one of the most important parameters in geomechanical analysis and modeling. Many methods have been proposed to estimate the brittleness index. One of the recently used methods is the intelligent method. In this paper, firstly the aim is to introduce a new algorithm using deep learning algorithms to predict the brittleness index in one of the wells of the hydrocarbon field in southwest Iran. In this article, first, the effective features for the input of the algorithms were determined using Pearson's correlation coefficient, and then using (recurrent neural network + multi-layer perceptron neural network) (LSTM + MLP) and (convolutional neural network + recurrent neural network) (CNN+ LSTM) brittleness index was estimated and the mean error value (MSE) and coefficient of determination (R2) were calculated for the training and test data. For both training and test data, both algorithms have a coefficient of determination close to 1 and a very low error. Also, in order to ensure the results of the algorithms, a part of the data was set aside as blind data, and the error and coefficient of determination were calculated for this data, and the error was MSE CNN+LSTM =26.0425, MSE LSTM+MLP =32.0751 and the coefficient of determination was R2 CNN+LSTM =0.8064, R2 LSTM+MLP =0.7615 . The results show the effectiveness of the introduced deep learning algorithms as a new method in predicting the brittleness index, and comparing the two algorithms presented, the CNN+LSTM algorithm has higher accuracy and less error.
Dr Eisa Hajiradkouchak, Dr Behzad Rahnama, Dr Hasan Nasrollahzadeh, Mr Ali Shahbazi, Mr Reza Raeiji, Mr Kazem Babaei,
Volume 18, Issue 3 (Autumn 2024)
Abstract
Many researchers believe that providing safe water, sanitary disposal and optimal management are the three axes of health, and in all these cases, while paying attention to the process of doing work, continuous control should also be done. This study was designed and implemented with the aim of seasonally investigating the physicochemical and microbial water quality of Qarasu River in Golestan province using the IRWQIsc index. 6 sampling stations were identified for Qarasu River and sampling was done once every month in four seasons of 1400. The measured parameters include pH, BOD, COD, dissolved oxygen (DO), electrical conductivity (EC), ammonium (NH4), nitrate (NO3), phosphate (PO4), total hardness (TH), turbidity and total suspended solids. It was a stool form. According to the measured parameters, Iran's surface water quality index IRWQISC was calculated. The results of the study based on the index showed that the quality of this index for all stations in all seasons was between 70.5 and 14.7 and according to the IRWQISC index, it was in five good categories (70-1.85), relatively good. (55-1/70), relatively bad (30-44-9), bad (15-29-9) and very bad (less than 15). The influencing parameters were total suspended solids, turbidity, nitrate, temperature and fecal coliform. It can be concluded that the amount of 70.5 with good quality is related to (Tuskestan village) in winter and the amount of 7.14 with very bad quality is related to (Pol Qara Tepe) in summer that the quality of the river water in The Gorgan to Aqqla road bridge station (Qorban Abad) is in bad condition in all seasons due to the entry of urban and industrial pollutants into this station, and Tuskestan village station has good and relatively good quality in most seasons because Tuskestan is in It is located in high altitudeand the entrance of clean running water into thisarea is more and it is far from industrial and urban pollutants.
