Maryam Haghbin,
Volume 8, Issue 2 (11-2014)
Abstract
The choice of a suitable bearing capacity of soil becomes the most important issue to be considered in any project. This paper describes analytical investigation conducted to evaluate the ultimate bearing capacity of adjacent footings in various spacings of footings. Bearing capacity of adjacent footings is determined based on virtual retaining wall method by applying equilibrium between active and passive forces. Results indicate the ultimate bearing capacity of each foundation changes due to the interference effect of the failure surface in the soil and it depends on footings spacing. In the present study, effect of soil type, depth of adjacent footings and reinforced soil is investigated on bearing capacity of adjacent footings. Results indicate closely spaced footings, can decrease or increase bearing capacity of adjacent footings with respect to single footings. Also, reinforced soil increases bearing capacity of closely spaced footings with respect to single footings on unreinforced soil, it depends on footings spacing. Finally, the predicted results are compared with those reported from experiments, analytical and numerical results performed by others, indicating an acceptable agreement.
Mr Alireza Darvishpour, Dr Ali Ghanbari, Dr Seyyed Ali Asghar Hosseini, Dr Masoud Nekooei,
Volume 13, Issue 5 (12-2019)
Abstract
One of the effective parameters in the dynamic behavior of reinforced soil walls is the fundamental vibration frequency. In this paper, analytical expressions for the first three natural frequencies of a geosynthetic reinforced soil wall are obtained in the 3D domain, using plate vibration theory and the energy method. The interaction between reinforced soil and the wall is also considered by modeling the soil and the reinforcement as axial springs. The in-depth transverse vibration mode-shapes, which were impossible to analyze via 2D modeling, are also analyzed by employing plate vibration theory. Different behaviors of soil and reinforcements in tension and compression are also considered for the first time in a 3D analytical investigation to achieve a more realistic result. The effect of different parameters on the natural frequencies of geosynthetic reinforced soil walls are investigated, including the soil to reinforcement stiffness ratio, reinforcement to wall stiffness ratio, reinforcement length, backfill width and length to height ratio of the wall, using the proposed analytical expressions. Finally, the results obtained from the analytical expressions proposed are compared with results from the finite element software Abaqus and other researchers’ results, showing that the proposed method has high accuracy. The proposed method will be a beginning of the 3D analytical modeling of reinforced soil walls.
