Search published articles


Showing 5 results for River
Flood Forecasting in Sombar River by Time series Analysis using Box-Jenkins Model
Mohamad Nakhaee,
Volume 4, Issue 1 (11-2010)
Abstract
Today, one of the most problems, for the purpose of flood management is river flow prediction. Prevention of economic body suffering arise of flood is one of the most important achievements of correct flow prediction. Factors and divers parameters influence the discharge, make complex the analysis. Conception-physical model, regression models and time series are the most common- analytical approach of river flow. In this search by using of discharge data of Ghareh Ghanlo station in 13 years ago, the prediction of Sombar river discharge by Box-Jenkins was done. To do so, MINITAB software was used. Also for selecting of the best prediction model used of error evaluation factor and ARIMA (1,1,0) (2,1,1)12 was selected as the best prediction model and finally by use of these methods river discharge for 24 next month, was forecasted. 
Engineering geomorphological assessment of lower Gamasiab river in east of Kermanshah province
, Greza Khanlari, M Heidari, Yazdan Mohebi, Reza Babazadeh,
Volume 7, Issue 2 (3-2014)
Abstract
Awareness of orphological features of rivers is necessary for recognition of river behavior and optimum application of rivers. Overall catchment physiografy have important role for determination factors such as floods, erodible and sediment mutagenicity. In this study in order to understand the behavior of Gamasiab River in the east of Kermanshah province, geomorphologic features of this river has been considered. Study of engineering geomorphologic properties is done by using existing data from previous studies, site visit and field perceptions, study of geology and topography maps. Physiographic properties of catchment, channels morphologic properties and geology conditions in this region have been studied. In this research, several parameters such as average width, environment, area, hydrogeologic coefficient, catchment form, maximum, minimum and mean high, and longitudinal slope has calculated. Also status of drainage density of this river has been investigated and time to focus calculated. Finally this river review and classified according to various classifications for rivers
Examination on the Rate of Weight Loss of Aggregates in Los Angeles Test in Different media A case study: South side of Daneh Khoshk and Damavand
Kazem Bahrami1, Seyed Mahmoud Fatemi Aghda, Ali Noorzad, Mehdi Talkhablou,
Volume 13, Issue 2 (8-2019)
Abstract
Aggregates are one of the high demand building materials in construction of structures and their characteristics have important effects on durability and permanence of projects. Abrasion resistance is one of the important features of aggregates that their utilization in concrete and asphalt are affected by texture and lithology of them. As rock consisted of harder minerals have higher abrasion resistance like igneous rocks, due to more siliceous minerals. More varieties in mineralogy compound usually lead to increase in aggregate abrasion. Aggregates that are contained of different minerals usually have less abrasion resistance. Porosity usually decreases the resistance abrasion. In addition to lithological properties, the environment where aggregates are deposited is important in determining resistance-related parameters of aggregates.
Rivers, alluvial fans, and taluses are the main environments where aggregates are deposited. Geological processes, such as weathering and particle movement may cause changes in natural aggregates, hence affecting their abrasion and impact resistance. Rock weathering can results in increasing porosity, producing minerals that are weaker in comparison to their original rock.
In the process of particles transport by stream water, weak parts of aggregates will be omitted. The present study is focused on the relationship between geology medium and the weight loss of aggregate in Los Angeles test. 
Methodology
Considering that lithology features in aggregates resistance against abrasion have an important role, in order to examine the effect of various geology environments in abrasion resistance of aggregates, the medium should be chosen having similar lithology. Therefore, the north of Damavand and the south of Daneh Khoshk anticline (north of Dire plain) were firstly chosen by using geology map, satellites images and field study. Damavand zone consists of trachyte and trachy-andesite volcanic rocks. These rocks cover the whole area around the Damavand peak. Also, Daneh Khoshk anticline is covered by thick Asmari formation. The selected environment are in the length of each other. Such that taluses feed alluvial fan and alluvial fans feed rivers. Samples were collected from different area of southern part of anticline. 10 river area, 12 alluvial fan and 6 taluses in the south-west area of Daneh Khoshk anticline (north of Dire plain) were chosen. Los Angeles test has been done according to standard A method ASTM D2216-10, 1990 on samples and the results were analyzed by analogous analyzer.
Results and discussion
Results show that porosity and micro-crack percentage increase, respectively in accumulated aggregate in river, alluvial fans and taluses areas. Also, porosity and micro-crack in various alluvial fans is different and is influenced by the area and length of main channel of alluvial fans’ catchment. The porosity decreases by the increase in the length of channel and area of alluvial fans’ catchment.
The percentages of aggregate weight loss in talus, alluvial fan and river areas decreases, respectively. Based on the obtained results, the lowest rates of weight loss belong to river environments (23.7 % in Daneh Khoshk and 42% in Damavand) whereas the highest rates of weight loss belong to taluses (49.3% in Daneh Khoshk and 48% in Damavand). The alluvial fans have an average state. Another noticeable point is the high weight loss in Los Angeles test in Damavand aggregate. Due to having harder mineral, igneous aggregate have more abrasion resistance, but this research illustrates that the weight loss resulting from Los Angeles test in these aggregates is high. This is because of virtues texture that weakness against the impact as well as their high porosity.
Conclusion
The result of this research indicates that the volume of aggregate weight loss in Los Angeles test is related to aggregate accumulation environment. The extent of aggregate abrasion resistance is lowest in talus medium and increases in alluvial fan and river environment, respectively. The difference in aggregate abrasion resistance in various areas result from geology process differences that applies to aggregates in various environment. The extent of caring particles in talus environment is very low and the type of movement is mass or sliding type in these media, micro-crack and weak parts remains within aggregates. The surface of micro crack is weak such that breaks easily in Los Angeles test due to the pressure results from the impact of aggregate, as well as the impact of steel ball on aggregate leading to aggregate breakages. Aggregates move more distances in alluvial fan and river. Aggregate strike together in riverbed and alluvial fan yielding to aggregates breakages from micro-cracks. As the movement distance increases, aggregates approach more to intact rock. During the particles move, the weathered and weak parts are damaged by aggregate abrasion to riverbeds and alluvial fan, and more resistant and harder aggregates remain. As the water current increases, the aggregates impact each other harder, more resistant micro-crack breakages and this change leads to decrease the weight loss in Los Angeles test.
./files/site1/files/132/1Extended_Abstracts.pdf
Investigating the engineering hydrogeomorphological characteristics of the Gian catchment and river of Nahavand in the Hamadan province
Dr. Davood Fereidooni, Dr. Sajeddin Mousavi, Dr. Esmaeil Najafi, Dr. Gholam Reza Khanlari,
Volume 16, Issue 4 (12-2022)
Abstract
Assessing and understanding the hydromorphological characteristics are necessary to understand the behavior of a river and its active processes. This is useful for understanding the erosion and sedimentation regime and changing the river path, for making correct engineering and human activities in the river's catchment area. The Gian River, with an average annual discharge of 2.3 m3/s, is one of the tributaries of the Gamasiab River in the Hamedan province. From a geological and hydrogeomorphological point of view, the Gian is a small river. It is fully compatible with the geological structures of the region. The calculation of the sinusoidal coefficient has shown that this river is a meandering river whose wavelength, the amplitude of the oscillation and the width of the meander belt are smaller in the mountainous area than in the plain area The gradient of the river bed is relatively low and it is classified as an erosion and sedimentation river in its different sections. The Gian River has a rocky bed in the mountainous part and an alluvial bed in the plain. The Gian River has a small catchment area, and, according to theGravelius' coefficient, its shape is almost elongated. The catchment elevation of the Gian River is between 1455 and 2700 with a weighted average of 1715.20 m.a.s.l. and its area decreases with the increase in the elevation. The concentration time of the catchment is 4.204 hours. The application of the data and results of the research can be very effective in land use planning, engineering and executive applications to predict river changes and protect engineering structures such as roads, bridges, coastal structures and railways, protect agricultural lands in the region and develop tourism.
 

Modeling the relationship between groundwater fluctuation and Dez river discharge in Dezful-Andimshek plain
Khadijeh Kord, Heeva Elmizadeh, Hakimeh Amanipour,
Volume 17, Issue 1 (3-2023)
Abstract
The study area is a part of the Dez River Basin, which is located in the central part of the basin. In this area, due to the climatic conditions, the irregular availability in terms of time and space, the increasing use of water resources and surface water resources, there is a great dependence on the underground water of the region. The main objective of this research is to investigate the factors influencing  the fluctuations of the water level in the Dezful-Andimeshk plain during a statistical period of 20 years. For this purpose, using piezometric well level data and well logs of the study area in WinLog software, maps of the groundwater level and the bottom level of reservoir were prepared using theIDW method. The results of the research showed that the greatest drawdown occurred in north-eastern, south-eastern and western parts of the study area. Asthe amount of precipitation, evaporation and temperature are high in this part, one of the reasons for the decline in these parts can be attributed to the climatic factors of the region. Other factors in the decline of the reservoir level are the main river channel and the high slope of the area. Comparing the changes in the reservoir level with the flow of the Dez River showed that there is a high correlation between the changes in these two parameters with a time interval of one year. Therefore, according to agricultural activities, these limited resources should be harvested, scientifically and fundamentally, the region will be at risk of a serious water crisis in the future.
 

Page 1 from 1     

© 2024 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb