Showing 9 results for Surface Temperature
Chenoor Mohammadi, Manouchehr Farajzadeh, Yousef Ghavdel Rahimi, Abbas Ali Aliakbar Bidokhti,
Volume 18, Issue 48 (4-2018)
Abstract
This study is aimed at estimating monthly mean air temperature (Ta) using the MODIS Land Surface Temperature (LST), Normalized Difference Vegetation Index (NDVI), latitude, altitude, slope gradient and land use data during 2001-2015. The results showed that despite some spatial similarities between annual spatial patterns of Ta and LST, their variations are significantly different, so that the Ta variation coefficient is four times the one of the LST. Our analysis indicated that while in winter latitude is the key factor in explaining the distribution of the differences LST-Ta, in other seasons the role of slope and vegetation become more prominent. After obtaining the spatial patterns of LST and Ta, we estimated Ta using regression models in spatial resolution of 0.125˚. The lowest estimation error was found in the months of November and December with a high explanatory coefficient (R2) of 70% and a standard error of 1 ° C. On the other hand, the maximum error was obtained from May to August with R2 between 59 to 63% and a standard error of 1.6 ° C which is significant at the 0.05 level. In addition, result of evaluation of individual months showed that estimation of Ta is more accurate at the cold months of the year (November, December, January, February, and March). With considering different land uses, the highest R2 was related to waters and urban areas (96 to 99%) in warm months, and the lowest R2 was for mixed forest and grassland (between 15 and 36%) in cold months.
Dr Sayyad Asghari, Hadi Emami,
Volume 19, Issue 53 (7-2019)
Abstract
Earth surface temperature is an important indicator in the study of energy equilibrium models at the ground level on a regional and global scale. Due to the limitation of meteorological stations, remote sensing can be an appropriate alternative to the Earth's surface temperature. The main objective of this study is to monitor the surface temperature and its relationship with land use, which is monitored using satellite imagery. For this purpose, the images were first obtained and the necessary pre-processing was applied to each one. Then it was compared to modeling and classification of images. Firstly, in order to investigate the changes in user-orientation, a user-defined classification map for each object was extracted using the object-oriented method. Then, to investigate the land use change, a map of user-landing changes map was extracted in an 18-year time period (2000-2017). Finally, in order to monitor the surface temperature, the surface temperature map of Ardebil was extracted. The results showed that there is a strong relationship between land use and surface temperature. As a user, urban users have a temperature of about 41 ° C (2017), which is also due to heat-absorbing urban temperatures. This is despite the fact that the use of hydrocarbons is due to a lower heat absorption of 34 ° C (2017). This shows the role of different uses in determining surface temperatures. Also, the relationship between surface temperature and vegetation cover was investigated in this study. The results showed that areas such as soil and urban areas with a lower coverage than areas such as agriculture and pasture, have a higher temperature. Because the coating is always an obstacle to the entry of heat, it has an inverse relationship with superficial heat.
Mokhtar Karami,, Rahman Zandi,, Jalal Taheri,
Volume 20, Issue 56 (3-2020)
Abstract
In recent years with the development of cities coatings of the Earth's has changed surface. These changes have caused some urban areas to have a few degrees higher than the surrounding temperature. This phenomenon is known as thermal islands. Mashhad is one of the major metropolises in Iran with the problem of thermal islands. Various parameters affect the formation of thermal islands in this city that should be considered. In this study TM, ETM+ and OLI images were used to obtain surface temperature over the period 1987-2016. The study of temporal variations in surface temperature showed that in the studied period, thermal islands were transferred from outside the city to the city. The model for describing the temperature of the surface of the earth has changed and has diminished from the temperature of the city's moderate and cool temperatures, and in contrast, the amount of high temperatures (thermal islands) has increased significantly. The TOPSIS method was also used to obtain the thermal forming factors. 13 natural and human factors affecting the formation of thermal islands were identified. Each expert opinion factor was used to determine the degree of importance. According to experts, the distance from the sanctuary with a weight of %234 and traffic of %155 is the most important and the height with a weight of %022 is least important in the formation of thermal islands. The final results obtained from this model showed that the factors affecting the formation of thermal islands are well recognized and the temperature decreases with these factors.
Ali Bahri, Younes Khosravi,
Volume 20, Issue 58 (10-2020)
Abstract
Considering the vast application of sea surface temperature in climatic and oceanic investigations, this parameter was studied in Oman Sea from 1986 to 2015. The SST was surveyed using trend analysis and Global and local Moran’s I spatial autocorrelation. In trend analysis, the Mann-Kendall test was used to determine the trend of SST changes and the Sen's Estimator method was used to examine the slope of the changes. Using these methods, it was found that during January, February and December, there was no significant ascending trend in SST values, and only parts of the Strait of Hormuz had a significance descending trend. On the other hand, there was no significant descending trend in March, and the ascending trend in the SST was seen in the southern part of the Oman Sea. Other months of the year had a significant ascending and descending trend in different parts of the Oman Sea, which October had the highest ascending trend. In the annual time scale, it was also found that the southern parts of the Oman Sea had ascending trend in the SST value and Western parts had a descending trend. The occurred changes in the high amounts (positive and negative) were corresponding to the significance ascending and descending trends. The results of Global Moran for the annual time scale indicated an ascending trend of autocorrelation values and cluster patterns of SST data over time, using the local Moran analysis, it was found that warm clusters of SST are increasing in the Oman Sea, and on the other hand, cold clusters of this parameter have been reduced over 30 years. According to the results of trend and spatial autocorrelation analysis, it has been found that SST have been increasing in different parts of the Oman Sea during 30 years, so climate change and global warming may have affected this region.
Hamideh Afsharmanesh, Zahra Hejazizadeh, Bohloul Alijani,
Volume 21, Issue 61 (6-2021)
Abstract
Climate predictions have been made in global, regional and local simulation, and climatic parameters have changed in terms of trends and models in climatology, futures studies are less visible in literature and climatology literature therefore environmental planning and futures analysis are an attempt to look at the long-term future in the field of climatology. Today, one of the most important challenges of the present and future is the increase in temperature and is the lack of climatic comfort. The growth of Tehran's metropolitan area, improving living standards, expanding urbanization and industry, climate change, and the energy shortage crisis are important. The survey forms were prepared by the climatologists and managers of Tehran and data analysis, futuristic techniques such as scenario for data analysis tool in this study was MICMAC software. have been used. In the research process, the most important key factors and drivers in relation to futures studies were identified in relation to the increase of temperature in the city of Tehran.
Mini scenarios and a comprehensive scenario were defined in three cases:
- Improvement of the Micro-Climatic Conditions of Tehran City + Climatic Comfort of Citizens
- Lack of good micro-climate in Tehran + low climatic comfort of citizens
- The lack of improvement in the micro-climatic situation in Tehran + the lack of climate comfort for citizens and increased energy consumption
According to the results of the study, the most important factors in creating a crisis of rising surface temperature can be the lack of attitude to the concept of micro-climate improvement and urban management.
Taher Safarrad, Yadollah Yousefi, Atefeh Rezaei Taleei,
Volume 21, Issue 62 (10-2021)
Abstract
Information on a variation of impervious surface is useful for understanding urbanization and its impacts on the hydrological cycle, water management, surface energy balances, urban heat island, and biodiversity. This research attempts to detect impervious surfaces and its changes by satellite imagery in Qaemshahr. The relationship between impervious surfaces and changes in land surface temperature in the city was investigated. For this purpose, after obtaining three images in 1978, 2000, and 2017, and performing the necessary preprocessing, the reflection values of the infrared spectrum and ground surface temperature in the study area were calculated. The reflectance of this spectrum was investigated in various land uses vegetation, asphalt and building areas in two parts of the urban and the suburb. Using the results of ANOVA and Tukey these properties compared to different land uses. By the difference between Permeable surfaces and impervious surfaces, the impervious surface index was calculated. The results of the detection and comparison of the three surveyed images showed that the impervious surfaces in Qaemshahr were significantly increased from 1978 to 2017. In the next step, by calculating the land surface temperature, it was determined that the temperature of the impervious surfaces is higher than the other parts of the study area. An increase in the population of the city followed by an increase in urban construction has led to an increase in impervious surfaces and a reduction in green space and this has caused a rise in city temperatures. The results of this study showed that increasing impervious surfaces has led to an increase of around 4 degrees in the city's temperature. Finally, any increase in the impervious surface at the city will lead to unsustainability in the urban environment, if not accompanied by proper planning.
Musa Abedin, Ehsan Ghale, Nazfar Aghazadeh, Maryam Mohamadzadeh Sheshegaran,
Volume 22, Issue 67 (12-2022)
Abstract
Studies have shown that the role of thermal temperature measurement in studying and estimating surface temperature is very important. Earth surface temperature is an important indicator in the study of equilibrium energy models on the ground at the regional and global scale. Due to the limitation of meteorological stations, remote sensing can be a good alternative to earth surface temperature estimation. The main objective of this study is to monitor the surface temperature of the Earth using satellite imagery and a relationship that can have a surface temperature with land use. For this purpose, the relevant images were first obtained and the necessary pre-processes were applied to each one. Then it was compared to modeling and classification of images. Firstly, in order to study land use change, land use classification map was extracted for each two years using a controlled classification method. Then, to study the land use change, the land use change map was extracted for a period of 28 years (1987-2015). Became finally, in order to monitor the surface temperature, the surface temperature map of Meshginshahr was extracted. The results showed that there is a strong relationship between land use and surface temperature. High-vegetation areas and low-temperature blue areas. Also, rainfed farming has the highest average temperature relative to adjacent areas, which indicates the dryness of agricultural products in the Meshginshahr city.
Mohsen Pourkhosravani, Ali Mehrabi, Behnaz Shaikhshariati,
Volume 23, Issue 68 (4-2023)
Abstract
Solar energy is receiving lots of attention because it is one of the cleanest, cheapest and most available energies in the world.but solar radiation in different parts is changing, thus, identifying appropriate locations for implementation of solar energy is necessary. Accordingly the aim of this study was to analyze the potential of solar radiation and land surface temperature on the Loot desert using remote sensing and geo statistical technique. Results show that Earth's surface temperature fluctuates between 29 and 79 degrees Celsius in the Lut Plain. So that Earth's temperature increases to the east and north-east of the region. Also, the radiation energy reaching the surface in the Lut plain varies from 232.77 to 237.61w/m² in different parts of the Lut plain. So that the maximum amount of energy is related to the south of the plain, and the further we move to the north reduces the amount of energy.
Mohammad Kazemi Garajeh, Behnam Salmani, Mohammad Hossein Rezaei Moghaddam,
Volume 24, Issue 74 (12-2024)
Abstract
The purpose of the present study is to assess the land surface temperature in relation to landuse for the city of Tabriz using remote sensing technology and GIS. Landsat 8 satellite image was used to map the land surface temperature for the study area. Atmospheric correction was applied to the desired image using the FLAASH method and the land surface temperature was estimated using the split-window algorithm for the study area with an accuracy of 1.51 degrees. Landuse map of Tabriz city in 6 classes was obtained using the object-based approach in eCognition software with an accuracy of 90/03. The results of studying the relationship between land surface temperature and landuse indicate that agricultural lands with a temperature of 18.22 °C have the highest land surface temperature. Also, water areas (rivers) have the lowest (10.30 °C) land surface temperature, because of their radiant power close to one. The research results also indicate that the split-window algorithm provides reliable results for land surface temperature estimation that can be used in environmental studies and earth sciences.
