Volume 7, Issue 4 (2-2021)
Journal of Spatial Analysis Environmental Hazards 2021, 7(4): 105-126 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
sheikhy V, malakooti H, ghader S. Numerical simulation of the adaptive and control strategies of Tehran metropolis summer heat island by evaluating heat fluxes. Journal of Spatial Analysis Environmental Hazards 2021; 7 (4) :105-126
URL: http://jsaeh.khu.ac.ir/article-1-3084-en.html
URL: http://jsaeh.khu.ac.ir/article-1-3084-en.html
1- University of Hormozgan
2- University of Hormozgan ,malakooti@hormozgan.ac.ir
3- Tehran University
2- University of Hormozgan ,
3- Tehran University
Abstract: (4299 Views)
Abstract
Increasing population growth and consequently the development of urban areas can profoundly affect climate events and thus intensify phenomena such as heat stress. Given the expected effects of this phenomenon on human health, it is very important to provide mitigating operational solutions to control future conditions. Therefore, the present study was conducted with the aim of simulating the effect of urban planning solutions on dynamic processes in the urban environment and at the local scale in Tehran city using the WRF mid-scale numerical model. Simulations were performed using 4 nested domains with a two-way interactive nesting procedure. The study used a simple Single-Layer Urban Canopy Model and a more advanced multi-layered approach called Multi‐layer urban canopy (BEP). The results of the simulations, after comparing the two urban schemes with a sensitivity measurement for different strategies, showed that the surface reflectance change scenario has the greatest impact on the land surface compared to the two scenarios of increasing urban green areas and reducing building density. Due to Tehran's specific topographic location and high overall temperature in this region, Tehran is relatively vulnerable to heat stress. Compared to the intensity of 5.5 °C for base mode, applying control measures can reduce the intensity of UHI up to 3 °C when using bright colors with high reflectivity for the ceiling and 1 ° C by replacing impermeable surfaces with natural vegetation in urban areas of Tehran.
Increasing population growth and consequently the development of urban areas can profoundly affect climate events and thus intensify phenomena such as heat stress. Given the expected effects of this phenomenon on human health, it is very important to provide mitigating operational solutions to control future conditions. Therefore, the present study was conducted with the aim of simulating the effect of urban planning solutions on dynamic processes in the urban environment and at the local scale in Tehran city using the WRF mid-scale numerical model. Simulations were performed using 4 nested domains with a two-way interactive nesting procedure. The study used a simple Single-Layer Urban Canopy Model and a more advanced multi-layered approach called Multi‐layer urban canopy (BEP). The results of the simulations, after comparing the two urban schemes with a sensitivity measurement for different strategies, showed that the surface reflectance change scenario has the greatest impact on the land surface compared to the two scenarios of increasing urban green areas and reducing building density. Due to Tehran's specific topographic location and high overall temperature in this region, Tehran is relatively vulnerable to heat stress. Compared to the intensity of 5.5 °C for base mode, applying control measures can reduce the intensity of UHI up to 3 °C when using bright colors with high reflectivity for the ceiling and 1 ° C by replacing impermeable surfaces with natural vegetation in urban areas of Tehran.
Type of Study: Research |
Subject:
Special
Received: 2019/12/16 | Accepted: 2020/09/14 | Published: 2021/03/13
Received: 2019/12/16 | Accepted: 2020/09/14 | Published: 2021/03/13
Send email to the article author
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
