Search published articles


Showing 5 results for Khorshiddoust

Ali Mohammad Khorshiddoust, Mehdi Asadi, Hassan Hajimohammadi ,
Volume 4, Issue 2 (7-2017)
Abstract

Thunderstorms are among the first meteorological phenomena, which have attracted human attention. Thunderstorms with rain showers and storms accompanied by hail and their role in causing sudden floods, both in terms of agriculture and human and financial losses, have been noticed by researchers. Rain hail of bullets or pieces of ice ascends very high in elevation due to the weather conditions along with electrical features occurrence. Hail grains or pieces of ice with diameters of 5 to 50 mm occasionally take longer time to be made up. Strong growth of hail through severe and repeated vertical movements of air in cumulonimbus clouds freezes the absorbed water droplets around hailstones. Few thunderstorm hails arrive on land many of which even contain no hail even in the most suitable parts of the clouds. The creation and hail falling, despite being warm and humid in the lower atmosphere and the ascending of clouds condensed with respect to the altitude and cold weather are coupled with the continuing maximum air instability. Because of the importance of hail event, studies on the formation and growth of hail in different countries are conducted for its prediction. In connection with hail and hail storms extensive research work has been carried out in including: Costa et al. (2001), Simonov and Gergiev (2003), Whiteman (2003) and Sterling (2003).
To investigate the thunderstorm and hails occurred in the region, we examined weather conditions. Initially the values of pressure, temperature and dew point temperature by the radiosonde measurements in different layers of the atmosphere were studied and the plotted graphs were obtained from NOAA. In the next stage for a closer look at weather conditions parameters like air temperature (Air), sea level pressure (SLP), geo-potential height (Hgt), specific humidity (Shum), vertical velocity (Omega) orbital wind component (Uwnd) and meridional wind component (Vwnd) were analyzed. The data records were collected from the website of the National Center for Environmental Prediction and National Climate Science (NCEP/NCAR). Instability investigation in the atmosphere for different levels of instability indices was applied.
Investigation on instability indices showed that on the first day the ascending index values (LI) were at 2-, which are the values added in the next two days. These conditions prove that the atmospheric turbulence is intensified in the days after the first day. By examining the thickness of the atmosphere it is seen on the Azerbaijan area On 16 July that on 5785 geo-potential meters the next day was associated with reduced 51 meter geo-potential added value at the third day. The results also revealed that the atmospheric precipitation of water values is calculated on a three-day index value of 17, 18 and more than 23 mm per day. To check the status of stormy weather index (SWEA) and K we found that the occurrence of thunderstorms in that area started on 16 July, approaching the end of high value added indicators that show strengthening of storms and their destructive mechanism in the day after the end of the other.
 
Investigation of thermodynamic charts showed that rapid convective ascent of available potential energy depending on the weather in the region has been so high and caused the weather to approach three days in advance to the upper layers of the atmosphere and atmospheric turbulence was created for the region. Examining the rainfall map of geo-potential height and vortices in 500 hPa on the first day exhibited that tthunderstorms were the result of interactions of the atmosphere, so that in middle levels the strong condensation of location with a range of more than 25 degrees of latitude on Caspian Sea was created and polar latitudes spread to nearby areas. On the second day, high-altitude thunderstorm in the core atmospheric cut-off formed on the Caspian Sea on the East of Turkey, northern Iraq and North West of Iran created the geo-potential height of the center of the 5750 geopotential meter. On the third day, atmospheric cut-off core to cut area of low pressure was made on the maximum positive vortices in the climate system. Conditions over the surface in the first day of the storm in the region indicated very strong contour of low pressure formed in the North East to West and North West of Saudi Arabia. In front of the two sides one of on Mediterranean Sea and other northern Russia, the contour of the pressure was imported into the Middle East.

Mr Yousef Zarei, Dr Ali Mohammad Khorshiddoust, Dr Majid Rezaeei Banafsheh, Dr Hashem Rostamzadeh,
Volume 6, Issue 4 (2-2020)
Abstract

Among the important challenges facing water resources of the country, one can mention the phenomenon of climate change and its impacts. The General Circulation Models (GCMs) can provide the best information about the response to increasing the concentration of greenhouse gases. Since the outputs of this model do not have sufficient time and space accuracy for studies on the effects of climate change, the output data of small general circulation models need to be quantitative. In this study, the SDSM statistical magnitudes and the CanemS2 model for climate change assessment, which are presented in the fifth report of the IPCC Comes under three scenarios RCP2.6, RCP4.5 and RCP8.5. The daily minimum temperature, maximum and precipitation rates of the synoptic station of Shahrekord (Cold mountain region) and Bandar Anzali (very humid and temperate climatic zone) are utilized and the parameters are for the period of 2040-2011, 2070-2070, and 2071-2099. Is. The results of the study show that the SDSM model has high accuracy and high efficiency in the climatic zone of very humid and temperate (Bandar Anzali) relative to the cold cliff (Shahrekord). However, the model has an acceptable ability to simulate the parameters in both areas. Under all three scenarios, RCP will experience the minimum and maximum temperature and precipitation in both climatic zones in all three times, but the cold climatic zone will be more affected by the climate change phenomenon.
Saeed Fathi, Ph.d. Ali Mohammad Khorshiddoust,
Volume 8, Issue 1 (5-2021)
Abstract

Zoning and Spatial Analysis of Potential Environmental Hazards
Case study: Silvana District
Abstract
Natural hazards can be considered as one of the most important threats to humankind and nature that can occur anywhere in the world. Natural hazards are one of the main obstacles to sustainable development in different countries and one of the important indicators of the development of world countries is their readiness to deal with natural hazards. Therefore, it is important to pay attention to it and appropriate measures should be taken to reduce the vulnerability of human settlements. Nowadays with increasing population growth, population dynamics and the large number of people exposed to various types of disasters, the need to identify environmental potential hazards and identification of hazardous areas are felt more and more. Meantime, some people may not be aware of potential hazards of their place of residence. So by identifying and evaluating potential hazards and their Risks before the occurrence, we can significantly reduce the severity of the damages and contribute to sustainable regional development. The negative effects of natural disasters can be minimized by the availability of comprehensive and useful information from different areas and Multihazard mapping is one of the most effective tools in this regard.
According to the above mentioned, in this study, the spatial analysis of potential hazards in Silvana district in Urmia County has been studied. This study area due to specific geographic conditions such as position, complexity of topographic and ecological structures, in general, the existence of environmental factors for hazards has been selected as the study area. There have been a number of hazards in the past and assessing of this area is necessary, because of the lack of previous studies. For this purpose, by reviewing various reports and doing field observations, three hazards including Flood, Landslide, and Earthquake are identified as potential hazards of the study area.
For assessing hazards, 12 factors in 6 clusters such as Slope, Aspect (Topographic factors), Lithology, Soil type, Distance to Faults (Geological factors) Precipitation (Climatological factors), River Network Density, Groundwater Resources (Hydrological factors), Land use, Distance to Roads (Human factors), Observed Landslide Density and Seismicity (Historical factors) as the research factors has been selected. For weighting factors, Analytic Network Process (ANP) Method in Super Decisions 2.6.0 software environment has been used. The results of the analysis show that Slope (0.201), Precipitation (0.161), Lithology (0.112), Distance to Faults (0.106), Land use (0.096), Rivers (0.078), Seismicity (0.06), Soil Type (0.055), Landslide Density (0.047), Aspect (0.033), Groundwater (0.03) and Distance to Roads (0.016), Respectively have maximum to minimum relative weight. Then, weighted maps are standardized with using FUZZY functions. For this purpose, Fuzzy membership functions such as Linear, Large and Small has been selected based on each factor. For some factors such as Slope, Aspect, Lithology, Soil type, Rivers density, Land use, Seismicity and Landslide density, Fuzzy linear function has been used. For some others such as Groundwater and Precipitation, Fuzzy large function has been used and for distance to Faults and distance to Roads, Fuzzy small function has been used. Finally, weighted maps were overlay in ArcGIS 10.4.1 environment with Fuzzy Gamma 0.9 operator and potential hazards zoning maps is obtained.
Final results indicate that major parts in the Northwest, West and South of the study area located in high risk zones and 59 percent of the total area exposed to high risk. Based on hazard zoning maps, 44 percent of the area exposed to Flooding, 48 percent exposed to Landslide and 44 percent exposed to Earthquake. Also, 61 percent of the population or 37394 people exposed to one hazard, 7 percent or 3817 people exposed to two hazard and 8 percent or 4914 people exposed to three hazard. According to surveys, only 21 percent of the study area is considered as a low risk area but that does not mean that environmental hazards will never happen in these areas. In general, and based on results, it is concluded that Silvana district has a high potential for environmental hazards. Final results of the research show that potential hazards identifying and preparation of hazard zoning maps can be very useful in reducing damages and achieving sustainable regional development. Therefore, considering the ability of hazard zoning maps to identify areas exposed to risk and assess the type of potential hazards, These analyzes should be considered as one of the most appropriate and useful tools in different stages of crisis management that can be the solution to many problems in preventing and responding to natural disasters and therefore, it is recommended that they be used in the crisis management process.
Keywords: Spatial Analysis, Environmental Hazards, Silvana, ANP Method, Risk
 
Mr Mohammad Hossein Aalinejad, Pro Saeed Jahanbakhsh Asl, Pro Ali Mohammad Khorshiddoust,
Volume 8, Issue 3 (12-2021)
Abstract

Investigation of Temperature and Precipitation Changes in the Seymarreh Basin by Using CMIP5 Series Climate Models
 
Abstract
Panel reports on climate change suggest that climate change around the world is most likely due to human factors. Temperature and precipitation are two important parameters in the climate of a region whose variations and fluctuations affect different areas such as agriculture, energy, tourism and so on. Seymareh basin is one of the most significant sub-basins of Karkheh. The purpose of this study is to predict the impact of climate change on precipitation and temperature of the Seymareh Basin in 2021-2040 period. These effects were analyzed at selected stations with uncertainties related to atmospheric general circulation models (GCMs) of CMIP5 models under two scenarios of RCP45 and RCP85 through LARS-WG statistical model. Then the uncertainties of the models and scenarios were investigated by comparing the monthly outputs of the models by the coefficients of determination coefficient (R2) in the forthcoming period (2021-2040) with the base period (1980–2010). The root mean square error (RMSE) calculations presented the best model and scenarios for generating future temperature and precipitation data.            
The Seymareh catchment is the largest and the main Karkheh sub-basin that covers parts of Kermanshah, Lorestan and Ilam provinces. The length of the largest river at the basin level to the site of the Seymareh Reservoir Dam is approximately 475 km, and the area of the basin is 26,700 km2. Geographic coordinates of the basin are from 33° 16 ́ 03 ̋to 34°59 ́ 29 ̋north latitudes and 46°6 ́9 ̋to ̋ 5 ́ 0 ° 49 Eastern longitudes, minimum basin height 698 m at the dam outlet and its maximum height 3,638 m. It is on the western highlands of Borujerd.
The information used in this study was obtained from the Meteorological Organization of the country. For this study, three synoptic stations of Kermanshah, Hamadan and Khorramabad, which had the highest statistical records and had appropriate distribution at basin level, were used. These data included daily and monthly temperature and precipitation information, and sunshine hours.
The LARS-WG fine-scale exponential model was proposed by Rasko et al., Semnoff and Barrow (1981). We used daily data at stations under current and future weather conditions. In order to select the best GCM model from the models mentioned above, minimum temperature, maximum temperature, precipitation and sunshine data were entered daily in the base period (1980–2010) and data were generated for five models under two scenarios of RCP45 and RCP85 for the period 2040–2021. The data were generated in 100 random series and the mean of required variables (minimum temperature, maximum temperature and rainfall) were extracted monthly in the period 2021-2040. Then, root mean square error (RMSE) and determination coefficient (R2) were used to evaluate the performance of the models and compare the results.
To ensure the models' ability to generate data in the coming period, computational data from the model and observational data at the stations under study should have been compared. The capability of the LARS-WG model in modeling the minimum temperature, maximum temperature, and radiation at the stations under study was completely consistent with the observed data. The model's ability to exemplify rainfall was also acceptable, however the highest modeling error was related to March rainfall.
By comparing the observed and produced data including monthly average precipitation, minimum and maximum temperatures through five mentioned models with their indices, the best model and scenario for future fabrication were determined. The results of this comparison showed that among the available models, HADGEM2-ES model under RCP 4.5 scenario had the best result for precipitation and HADGEM2-ES under RCP 8.5 scenario predicted the best result for maximum temperature. Determining the best model, precipitation data, minimum temperature and maximum temperature produced in the selected models and scenarios were analyzed to investigate the climate change temperature and precipitation for the future period.
The results of this study indicated that due to the wide range of output variations of different models and scenarios, by not taking into account the uncertainties of the models and scenarios can have a great impact on the results of the studies. It was also found in this study that the LARS-WG exponential model was capable of modeling precipitation data and baseline temperature in the study area, so that the radiation data, minimum and maximum temperatures were completely consistent with the data.
The observations are consistent and the models' ability to predict rainfall is very good and acceptable manner. In investigating the uncertainties caused by atmospheric general circulation models and existing scenarios, the best model to predict precipitation in the study area is HADGEM2-ES model under RCP 8.5 scenario, the best model for temperature estimation model HADGEM2-ES under RCP scenario No. 4.5.
The overall results of this study revealed that the average precipitation in the basin will decrease by 4.5% on average, while the minimum temperature will be 1.5° C and the maximum temperature will be 2.17° C. The highest increase will be due to the warmer months of the year. Notable are the disruptions of rainfall distribution and the high temperatures will have significantly negative consequences than rainfall reduction.
 
  • : Climate Change, Climate Scenarios, Uncertainty, LARS-WG, Seymareh.
 
 

Kaveh Mohammadpour, Ali Mohammad Khorshiddoust, Gona Ahmadi,
Volume 10, Issue 2 (9-2023)
Abstract

Introduction
Dust storm is a complex process affected by the earth-atmophere system. The interaction between the earth and atmosphere is in the realm of the climatologists and meteorologists, who assess atmospheric and climatic changes, and monitor dust spread. Dust is the main type of aerosols which affects directly and indirectly radiation budget. In addition, altogether they affect the temperature change, cloud formation, convection, and precipitation. The most important studies about dust analysis have considered the use of remote sensing technique and global models for analyzing the behavior and dynamics of dust in recent two decades. To achieve such a goal, this paper has used MODIS and NDDI data to study and identify the behavior of atmospheric dust in half west of Iran.

Materials and methods
The western region of Iran is the study area. The data used in this study are divided into two categories: ground-based observations in 27 synoptic stations extracted from the Iran’s Meteorological Organization during the period (1998-2010) and satellite MODIS images during the first to fourth days of July 2008 as atmospheric dust extremes. Data was analyzed by using ArcGIS and ENVI software and NDDI index. 
Results and Discussion
According to results, interpolated map for the number of dusty days during the study period over the western half of Iran showed that the scope of study area does not involve an equal system aspect quantity of occurrences. The number of dusty days occurrences increase from north toward south and the sites located in northern proportions of the area have experienced lower dust events. In contrast, maximum hotspots are occurring over southwestern sites such as: Ahvaz, Ilam, Boushehr and Shiraz. Therefore, principal offspring of dust input has been out of country boundaries and arrived at distant areas. Also, based on results obtained using satellite remote sensing images and applied NDDI index, maximum of intense dust cover is observed over Fars, Ilam, Boushehr and Ahvaz provinces on the first, second, third and fourth of July. However, the lowest rate of index situated in extent far such as: East and West Azerbaijan provinces. Thus, parts located on the north of the study area experienced less dusty days and the maximum dust cores were located in the southwestern (mostly Khuzestan). The long-term results were consistent with the daily average of NDDI index in the whole study area and indicated the hotspot areas (Ilam, Ahvaz, Omidyeh, Bushehr and Shiraz) during the first to fourth days of July 2008. However, the level of dust cover in the region has reduced when a wet and cloudy synoptic system passes over the central and northwestern parts of the study area.
Conclusions
The climatic interpolated map interpretation indicated that increase of dust concentration based on ground-based stations, which are consistent with dust concentration, is overshadowed by the latitude and proximity of sources of dust source in the Middle East. Also, the long-term climatic results of ground-based observations were consistent with the NDDI index calculated on dust extremes in the whole study area and in the southern areas (Ilam, Ahvaz, Omidyeh, Bushehr and Shiraz) during study days of July, 2008. Therefore, dust occurrence increases from north to south and the maximum hotspots over southwestern confirm the proximity of the south western region of Iran to deserts and sedimentary plains and their direct relationship with dust sources in the Middle East. These regions highlight the volume and expansion of dust outbreaks, which were well detected due to the satellite imagery and spectral characteristics of MODIS for monitoring changes in the dust phenomenon.
Overall, the use of satellite remotely sensed data/images not only cover the ground-based observation datasets gap to identify, highlight, and analyse the dust phenomenon, but also takes a much more geographical approach in analysing environmental hazards such as dust. It is also suitable for studies of atmospheric compounds such as atmospheric aerosols.


Page 1 from 1     

© 2024 CC BY-NC 4.0 | Journal of Spatial Analysis Environmental hazarts

Designed & Developed by : Yektaweb