Journal of Spatial Analysis

---

---

---

---

---

Synoptic Patterns that Determine the Trajectory of Precipitation Systems of Sudanese Originntroduction
 
Introduction
Precipitation as an important climatic element has many irregularities and fluctuations. Iran, especially its southern half, has significant precipitation fluctuations. Several atmospheric systems are involved in the formation of precipitation in this region from of Iran. Sudanese system is one of the most important precipitation systems in Iran. This system, in different synoptic conditions, enters Iran from different input sources and passes through Iran in different ways.
The important and influential role of Sudan's low pressure on precipitation in Iran, especially in the southern part of the country, has been repeatedly demonstrated in numerous studies. But the formation and its expansion have received little attention. These reasons have led to the consideration of the position of Sudan's low-pressure synoptic expansion as an influential factor in the southern half of Iran precipitation. Therefore, the position of the expansion of this important climatic system has been investigated separately in the precipitation of the three regions south west, south middle and south east.
 
Materials and Methods
Two categories of data were used for this study. These data include daily precipitation data from the Iranian Meteorological Organization and the ERA interim gridded data include Sea Level Pressure (SLP) and the Geopotential Height of the 700 HP atmospheric level of the ECMWF. Second category data with horizontal resolution of 0.5 × 0.5^°  degrees during 1997-2017 statistical period were prepared.
To achieve the purpose of the study, the southern half of Iran was first divided into three regions: South-West, South-Mid and South-East. After extracting daily precipitation of the selected stations in all three geographic regions, a total of 142 precipitation systems was identified by applying the required criteria. From this number of precipitation systems, respectively, were obtained in the south west 107, south middle 19 and southeast 16, respectively. Then, the source of precipitation systems was extracted using the atmospheric lower level maps. Subsequently, the central core and zone of the first closed curve around the Sudanese low pressure were extracted separately for each group. The main axis of the Sudanese low-pressure trough are also drawn on all rainy day. Finally, the model or pattern of atmospheric circulation in the precipitation systems of the regions is presented separately.
 
Results and Discussion
The purpose of this study was to determine the position of the central core and the pattern of expansion of the first closed curve around the Sudanese system and the Sudanese system trough in precipitation in each of the three regions of the southern half of Iran. Since the arrangement of precipitation systems may vary in different months of the year, depending on the general atmosphere of the atmosphere, the position of the core, the pattern of expansion of the low-pressure trough and the trough of 700-hPa atmospheric level is analyzed separately each month.
In the synoptic pattern of systems, entering from the south west of Iran, the Arabian Subtropical High Pressure with the southwest-northeast direction is located in the eastern half of the Arabian Peninsula and west of the Oman Sea. In this pattern, the troughs are generally north-south. As a result, the rainfall intensity and intensity of precipitation systems, entering the south west of Iran are higher than the other two routes. The focal point of troughs this route is between 30 to 40° east (Eastern Mediterranean). In systems with South-Mid route, the Arabian Subtropical High Pressure has slightly shifted southward and found a northeast-southwest axis. In this pattern, the Mediterranean troughs are generally northeast-southwest. This pattern causes precipitation in the eastern half of the Iran. Or at least no precipitation in the northwest and west of the Iran.
The synoptic pattern of precipitation systems that enter Iran from the southeast is somewhat more complex. In this pattern, the Arabian Subtropical High Pressure has an unusual eastward shift. So that it is based in India. The troughs of this path showed two completely opposite patterns. In some systems, the troughs in the southwest-northeast direction with the orbital inclination, covers the whole of Saudi Arabia and southern Iran. On the contrary, in some systems the troughs stretch quite opposite to the first group, the northwest-southeast direction.
This asymmetry in the expansion of the troughs should be traced to the general topography of the Tibetan Plateau and the circulation pattern of caused by the presence of the Tibetan anticyclone. Basically Mediterranean troughs are disrupted in their usual eastward displacement after a longitude of 60 degrees. As you can see, the Sudanese low-pressure troughs for the South-East Route lack structural discipline and coordination.
 
Conclusion
The results of this study show that the location and pattern of expansion of the first closed curve around low pressure in different precipitation months and systems of the three zones do not differ significantly in location. Rather, it is the most important system in determining the direction of Sudanese systems, the Arabian Subtropical High Pressure and the pattern of expansion of the eastern Mediterranean trough. In the synoptic pattern of systems, entering from the south west of Iran, the Arabian Subtropical High Pressure with the southwest-northeast direction is located in the eastern half of the Arabian Peninsula and west of the Oman Sea. In this pattern, the troughs are generally north-south. In systems with South-Mid route, the Arabian Subtropical High Pressure has slightly shifted southward and found a northeast-southwest axis. In this pattern, the Mediterranean troughs are generally northeast-southwest. The synoptic pattern of precipitation systems that enter Iran from the southeast is somewhat more complex. In this pattern, the Arabian Subtropical High Pressure has an unusual eastward shift. So that it is based in India. The Sudanese low-pressure troughs for the South-East Route lack structural discipline and coordination. This asymmetry in the expansion of the troughs should be traced to the general topography of the Tibetan Plateau and the circulation pattern of caused by the presence of the Tibetan anticyclone.
 
Keywords: Synoptic Patterns, Sudanese Low Pressure system, Eastern Mediterranean Trough, Southern Half of Iran, Arabian Subtropical High Pressure.
 
 
 

---

 Explain the Processes of Modernization on the Spatial Mismatch in Urban Neighborhoods
(The case of, Region 4 of Tehran Municipality)
 
Modernization processes and modern urban planning policies have had significant effects and consequences on the spatial transforms of cities in the world and Iran. Among that processes, we can mention the growing gap between social groups and urban spaces based on a number of contexts and mechanisms that, from the late 1960s onwards, have been conceptualized and measured experimentally under what is called the “spatial mismatch hypothesis”. The basic methodology for estimating the state of spatial mismatch in cities or urban regions is based on the logic of “spatial segregation” between social groups and land uses simultaneously; Because based on the spatial mismatch hypothesis, it is not possible to explain the segregation mechanisms between social groups in the city without considering its relation with segregation mechanisms in urban spaces or land uses, and vice versa. Based on such methodological logic, the present paper has assessed the state of spatial (mis)match in Region 4 of Tehran Municipality. The method of data collection was in the form of libraries and data available in the Statistics Center (General Census of Population and Housing in 2016 and at the level of demographic blocks of the region), Road and Urban Development Organization, Municipality of Region 4. Variables used to analyze the spatial mismatch in the region
The level of education, employment in study abroad and inside the country, employment and unemployment status, level of housing infrastructure, type of housing ownership, changes in land use pattern and the amount of daily commutes in the study area.
 Findings obtained based on the defined variables and techniques used in Segragation Analyzer and ArcGIS software show that the state of spatial mismatch in this urban region (like many other cases in cities around the world) is high, but its intensity is higher in terms of job and literacy of social groups in relation to the state of activity and residential land uses. Relying on such findings, some strategies and policies have been proposed to reduce the state of spatial mismatch in Region 4, and to contribute to a more even and equitable distribution of development in this region and hence reduce poverty among the lower classes.
 
Keyword:
Urban modernization, spatial mismatch hypothesis, socio-spatial segregation, Region 4 of Tehran Municipality
 

---

---

Evaluation of hot spots changes in Tehran city and satellite based on land use and its role in urban heat hazards
Expanded abstract
Problem statement:
Urbanization and human activities affect the urban climate and clearly affect the air temperature close to the surface. In Tehran and its satellite, factors such as climatic region, season, time of day and wind regimes, topography, urban environments, population density, residents' activity, vegetation structure and urban physical form play an important role in the formation of urban heat islands. The purpose of this research is to determine the type of spatial distribution of heat islands of Tehran metropolis and satellite cities using land use and land cover. Replacing natural land cover with impervious surfaces due to urban development has negative environmental, social and economic impacts, in addition to beneficial aspects. Most of the albedo belong to the built areas and the bare land and the smallest of the Albedo belong to the aquatic areas and vegetation. In this research, the hypothesis is whether the suburbs may have higher temperatures than urban areas depending on the type of land use? In fact, it is examined the spatial distribution of the heat island of Tehran and its satellites, in which the use of land and land cover are analyzed as a factor contributing to the creation, intensification or reduction of the thermal island.
Methodology:
Extraction and preparation of imagery data through the Landsat 7 Satellite ETM + sensor over the years 2001-2015 and selection of June as the hottest month of the study area. These images were extracted from Route 164 and Row 35 of the USGS. An assessment was carried out through the accuracy of ground surface temperature data by Landsat satellite images and obtained temperatures from the weather stations in the area based on the Taylor diagram. In order to investigate the spatial structure of the cells obtained in each map, each containing surface temperature and heat island extraction, it used the methods of world spatial autocorrelation (high and low clustering, spatial correlation) and local (Cluster and Outlier analysis, hot spot analysis). The high and low clustering statistics show how the concentration of high or low values ​​in the region. In the next step, the results of analysis of Anselin Local Moran and hot spots were compared in map format. Hot spots were analyzed in all studied regions and in all 7 cities. The area of ​​hot spots was investigated over the course of 15 years and the results were presented in table and diagram form.
Land use was surveyed for every 7 county. In the last section were studied, the relationship between hot spots in each city and type and land use changes over 15 years.
Surface spatial analysis of the surface temperature of the area showed that the cells follow a cluster pattern and their trend towards clustering. Any kind of land cover and land use will create special features in a place that can be increased or decreased with a specific microclimate.
Explaining and results:
After selecting the years 2001, 2005, 2010, and 2015 as the sample and survey of the temperature of each land use in that year, it was determined that artifact, pasture, bare lands, forest, aquatic areas, agriculture and green spaces were respectively have the highest to the lowest temperature in the area. On the other hand, in the area of heat island in a region are Rabat Karim, Ray, Islamshahr, Tehran, Shahriar, Karaj and Shemiranat, respectively.
In spite of the reduction of aquatic areas and even bare lands, because of the large impact of green space or agricultural land was reduced the extent of heat islands during the statistical period, and on the contrary, the reduction of green space and agricultural land in places where even their forest areas have grown, has increased the levels of heat islands. This suggests that the dispersion and extent of green spaces has a more effective role in reducing the heat island compared with the creation of limited forest and planted surfaces in one place. Hence, in Tehran despite the significant growth of artifacts, due to the increasing growth of green space, the heat islands has been reduced compare with the Ray, Robatkarim and Islamshahr cities, which are exactly on its suburbs.
 
Keywords: Heat Island, hot spots, land use, Tehran, satellite cities.
 
 

---

 
 

---

Application of Sentinel 5 satellite imagery in identifying air pollutants Hotspots in Iran
 
Shiva Gharibi¹, Kamran Shayesteh²
1- PhD Student of Environmental Science, Malayer University, Malayer, Iran.
2-Assistant professor, Department of Environmental Sciences, Faculty of Natural Resources and Environment, Malayer University, Malayer, Iran
 
k.shayesteh@malayeru.ac.ir
Extended abstract
1- Introduction
Today, poor air quality is one of the most important environmental problems in many cities around the world. Air pollution can have a devastating effect on humans, plants, organisms, and human assets, and efforts are being made to anticipate and analyze the amount of distribution and transmission of air pollutants in order to minimize the adverse effects on air quality and climate. Among the most important air pollutants are (CO), (SO2), (NO2), (O3) and aerosols (AI). Numerous studies have been conducted on the monitoring of these pollutants based on information and statistics from pollution monitoring devices, but the use of satellite images in the field of monitoring and measuring pollutants has been limited. Due to the increasing growth of these pollutants, in this study, an attempt has been made to identify the average spatial concentration of the most important air pollutants as the actual sources of pollution on the scale of Iran from October 2018 to December 2019. Also, identifying the most polluted centers in Iran based on the average of 5 pollutants is another goal of this study. Therefore, the aim of this study is to demonstrate the ability of Sentinel satellite to monitor air pollutants, and the ability of GPW images to produce a population density map for the first time on an Iranian scale.
 
2- Methodology
 Using the Python programming language in the Google Earth Engine program environment, various products related to CO, SO2, NO2, O3 and AI pollutant images, obtained from Sentinel-5 satellite images during the study period and in the scale of Iran, were obtained for monitoring of air pollutants and determination of pollutants focuses. The output variable is defined as a set of images based on the time filter (2019) and the spatial filter (Iran borders). The output of the average concentration of pollutants for each month is calculated separately and annually in these filters. Then, the spatial map of the average concentration of pollutants in the Arc map software was analyzed and statistical information related to the average concentration of these pollutants was processed by SPSS statistical software. To determine the hotspots in terms of all pollutants, the raster location map of each pollutant was classified using the Jenks algorithm. In order to identify the share of provinces and counties, the amount of pollutants was also analyzed by spatial statistics in GIS environment and using the Zonal Statistics command based on the defined administrative boundaries. The G statistic was used for Cluster analysis, and in order to identify Hot Spots and Cold Spots, Getis-Ord Gi statistic (Gi) was used in GIS environment.To determine the population of each province, the latest census information of Iran as well as satellite images related to the fourth version of Gridded Population of World (GPW) product were used. Finally, The Moran index was used to determine the pattern of pollutants distribution and the spatial autocorrelation.
 
3- Results
 Spatial output from the processing of Sentinel-5 satellite images during the study period for identifying air pollution centers in Iran showed that the highest levels of nitrogen dioxide were recorded in the majority of cities in Tehran and Alborz provinces and then in the centers of other provinces. In the case of carbon monoxide, the highest rate is in Tehran and the coasts of the Caspian Sea and Khuzestan, and coastal areas of Bushehr and Hormozgan provinces. The highest amount of ozone is in the northern parts of the provinces of West and East Azerbaijan, Ardabil, Gilan, Mazandaran, Golestan and Northern Khorasan. Most of the dust was in the southern, eastern, southeastern and central provinces of Iran. The highest amount of sulfur dioxide pollutants is recorded in Tehran and then in the provinces of Khuzestan, Kerman, Hormozgan, Bushehr, Markazi, Qom, Isfahan and Khorasan Razavi. Provincially, the highest share of nitrogen dioxide is in the provinces of Tehran, Alborz, Qazvin and Qom. The highest provincial share of carbon monoxide is in Khuzestan, Gilan and Mazandaran provinces. The highest share of dust is in the southeastern provinces, including Sistan and Baluchestan, the highest share of sulfur dioxide is in Khuzestan province, and the highest share of ozone pollution is in the coastal provinces of Caspian Sea. Compliance of the average 5 pollutants with Google Earth images showed that the contaminated areas are located in the cities of Abadan, Imam Khomeini Port, Mahshahr Port and Ahvaz (Khuzestan Province), Tehran, Pakdasht (Tehran Province) and Assaluyeh Port (Bushehr Province). The results of comparing the average concentrations of pollutants in different seasons showed that there was no significant difference between CO, NO2 and O3 pollutants in different seasons, but suspended particles and aerosols in winter and autumn seasons have a significant difference with the amount of this pollutant in spring and autumn. Also, SO2 pollutant in autumn had lower concentrations than other seasons. The results of clustering analysis to determine the status of significant spatial clusters showed that the data are in the confidence range and have spatial auto-correlation and cluster distribution pattern.
 
4- Discussion & Conclusions
 According to Sentinel-5 satellite images, most of the pollution centers in Iran are related to petrochemical industries and refineries, which are located in the cities of Abadan, Imam Khomeini port, Mahshahr port and Ahvaz (Khuzestan province), Assaluyeh port (Bushehr province) and common pollutants. By these centers are NOX, SO2, CO, suspended particles and aerosols. Also, other centers (Tehran, Pakdasht in Tehran province) are located in the most populous urban areas of, which have been identified as hotspots in high production of NO2 and CO, due to high population and urban traffic.  Due to the higher population density of Tehran and Pakdasht than other cities in Iran, air pollution can be more important in these cities. Therefore, the use of satellite imagery to monitor Iran's air pollutants and the location of hotspots can be very cost-effective and time-consuming.
 
Keywords: Air Pollution Monitoring, Sentinel, Satellite Imagery, Polluted Hotspot, Moran’s Index.
 

---

Investigation of Temperature and Precipitation Changes in the Seymarreh Basin by Using CMIP5 Series Climate Models
 
Abstract
Panel reports on climate change suggest that climate change around the world is most likely due to human factors. Temperature and precipitation are two important parameters in the climate of a region whose variations and fluctuations affect different areas such as agriculture, energy, tourism and so on. Seymareh basin is one of the most significant sub-basins of Karkheh. The purpose of this study is to predict the impact of climate change on precipitation and temperature of the Seymareh Basin in 2021-2040 period. These effects were analyzed at selected stations with uncertainties related to atmospheric general circulation models (GCMs) of CMIP5 models under two scenarios of RCP45 and RCP85 through LARS-WG statistical model. Then the uncertainties of the models and scenarios were investigated by comparing the monthly outputs of the models by the coefficients of determination coefficient (R²) in the forthcoming period (2021-2040) with the base period (1980–2010). The root mean square error (RMSE) calculations presented the best model and scenarios for generating future temperature and precipitation data.            
The Seymareh catchment is the largest and the main Karkheh sub-basin that covers parts of Kermanshah, Lorestan and Ilam provinces. The length of the largest river at the basin level to the site of the Seymareh Reservoir Dam is approximately 475 km, and the area of the basin is 26,700 km². Geographic coordinates of the basin are from 33° 16 ́ 03 ̋to 34°59 ́ 29 ̋north latitudes and 46°6 ́9 ̋to ̋ 5 ́ 0 ° 49 Eastern longitudes, minimum basin height 698 m at the dam outlet and its maximum height 3,638 m. It is on the western highlands of Borujerd.
The information used in this study was obtained from the Meteorological Organization of the country. For this study, three synoptic stations of Kermanshah, Hamadan and Khorramabad, which had the highest statistical records and had appropriate distribution at basin level, were used. These data included daily and monthly temperature and precipitation information, and sunshine hours.
The LARS-WG fine-scale exponential model was proposed by Rasko et al., Semnoff and Barrow (1981). We used daily data at stations under current and future weather conditions. In order to select the best GCM model from the models mentioned above, minimum temperature, maximum temperature, precipitation and sunshine data were entered daily in the base period (1980–2010) and data were generated for five models under two scenarios of RCP45 and RCP85 for the period 2040–2021. The data were generated in 100 random series and the mean of required variables (minimum temperature, maximum temperature and rainfall) were extracted monthly in the period 2021-2040. Then, root mean square error (RMSE) and determination coefficient (R²) were used to evaluate the performance of the models and compare the results.
To ensure the models' ability to generate data in the coming period, computational data from the model and observational data at the stations under study should have been compared. The capability of the LARS-WG model in modeling the minimum temperature, maximum temperature, and radiation at the stations under study was completely consistent with the observed data. The model's ability to exemplify rainfall was also acceptable, however the highest modeling error was related to March rainfall.
By comparing the observed and produced data including monthly average precipitation, minimum and maximum temperatures through five mentioned models with their indices, the best model and scenario for future fabrication were determined. The results of this comparison showed that among the available models, HADGEM2-ES model under RCP 4.5 scenario had the best result for precipitation and HADGEM2-ES under RCP 8.5 scenario predicted the best result for maximum temperature. Determining the best model, precipitation data, minimum temperature and maximum temperature produced in the selected models and scenarios were analyzed to investigate the climate change temperature and precipitation for the future period.
The results of this study indicated that due to the wide range of output variations of different models and scenarios, by not taking into account the uncertainties of the models and scenarios can have a great impact on the results of the studies. It was also found in this study that the LARS-WG exponential model was capable of modeling precipitation data and baseline temperature in the study area, so that the radiation data, minimum and maximum temperatures were completely consistent with the data.
The observations are consistent and the models' ability to predict rainfall is very good and acceptable manner. In investigating the uncertainties caused by atmospheric general circulation models and existing scenarios, the best model to predict precipitation in the study area is HADGEM2-ES model under RCP 8.5 scenario, the best model for temperature estimation model HADGEM2-ES under RCP scenario No. 4.5.
The overall results of this study revealed that the average precipitation in the basin will decrease by 4.5% on average, while the minimum temperature will be 1.5° C and the maximum temperature will be 2.17° C. The highest increase will be due to the warmer months of the year. Notable are the disruptions of rainfall distribution and the high temperatures will have significantly negative consequences than rainfall reduction.
 

• : Climate Change, Climate Scenarios, Uncertainty, LARS-WG, Seymareh.

 
 

---

Introduction
Geographical situation of Iran is a place for interacting many physical and human processes which lead to specific precipitation climatology in the country. The month to month variation of precipitation is one of  the features which the precipitation climatology may reflect due to tempo - spatial characteristics. In fact, monthly distribution of precipitation is one of precipitation normal features building up the climate structure. In order to recognize this fundamental characteristic three following questions have been raised:
1) Have the month to month distribution of precipitation changed over recent four decades?
2) How is the pattern of relationship of month to month distribution of precipitation and spatio - topographical variables?
3) Is it possible to find a spatial pattern for decadal changes of precipitation of month to month distribution?

Data and Methods
In order to find a responses for the abovementioned questions the distribution of month to month precipitation and its decadal changes was considered by adopting coefficients of variations (CV) for 46 years (1970-2016)  and using the third version of Asfazari dataset. The relationship of precipitation data and spatio-topographical variables calculated based on regression techniques. Moreover, the spatial pattern considered by using cluster analysis.  The CV calculated as follow:

here ،،  are ith raw's and jth column's CV, standard deviation, and monthly mean, respectively.
CV and its relationships with spatio-topographical variables were calculated in two temporal scale, for whole the under investigation period (1970-2016) and in decadal period for four decades (1977-1986, 1987-1996, 1997-2006, 2007-2016).
Discussion
 The results of current study proved that the month to month different in precipitation amounts have had spatial variations, whilst the temporal trends is not statistically significant. In addition, the minimum, maximum, and consequently, the range of values also the averages have not experienced significantly changes. However, the region experiencing the same values of precipitation illustrated oscillatory behavior. Accordingly, the decadal variations have happened in different areas. Although the there have been statistically significant relationships between monthly CV and spatio - topographical factors, the correlations were low. Based on cluster analysis, we found 5 regions according to CV and its anomalies in compares with normal CV for all under investigation period. These regions generally follow the latitudes from 32 N toward northern latitudes, whilst the region in the south of 32 N generally follow the longitude patterns.
Results
Precipitation is known a chiastic and complicated climate element. One of chiastic behaviors which precipitation shows in its different time - scale behavior is its month to month distribution among a given year. In current research the decadal variation of  above-mentioned behavior among recent four decades and the variation of its relationships and the spatio - topographical features , as parts of climate structure of the country, have investigated in details. 
Our finding illustrated that the month to month different in precipitation amounts have had tempo - spatial variations, whilst the temporal long - term trends is not statistically significant. Moreover, the values of minimum, maximum, and consequently, the range of month to month CV also the decadal averages have not experienced significantly changes over four under study decades. However, the region experiencing the same values of precipitation depicted oscillatory behavior. consequently, the decadal variations have happened in different areas. Although there have been statistically significant relationships between monthly CV and spatio - topographical variables, the correlations were not considerably high. Based on cluster analysis technique, we found 5 regions according to CV and its anomalies in compares to normal CV for all under study decades. These regions generally follow the latitudes from 32 N toward northern latitudes, whilst the region in the south of 32 N generally follow the longitude patterns.

KeyWords: Iran precipitation, Month to month changes in precipitation, Inter annual variation of precipitation, Precipitation anomaly, Spatial analysis of precipitation

 

---

Streambank erosion hazard analysis by BEHI method, case study: Sajadroud stream, Mazandaran province
Extended Abstract
Introduction
River bank erosion is a complex natural process and plays an important role in the dynamic equilibrium of the river. The amount of river bank erosion affects the river plan, cross section and dimensions of the river and is the main factor controlling channel migration and the evolution of the river planform. This research was conducted with two main objectives, which are: 1. River bank erosion susceptibility analysis in incised rivers in mountainous areas, 2. Comparison of river bank erodibility with two methods original BEHI and modified BEHI.
Method
In this study, Bank Erosion Hazard Index (BEHI) and the modified BEHI method along a part of Sajadrood Stream in Mazandaran province have been investigated. The original BEHI (Rosgen, 1996, 2001) evaluates the river bank erosion field measurements. In this method, several parameters are measured, including bank height, Bankfull height, bank angle, root depth, root density, surface protection, bank material structure and stratification. From this parameters, the bank angle and height, root depth can be measured, but indicators such as plant root density and surface protection are visually estimated as a percentage. The score of each index varies from 1 to 10. The total scores of all indicators are classified into 6 groups: very low, low, medium, high, very high and extreme.
Newton and Drenten (2015) Based on the modified BEHI proposed a protocol for estimating the river bank erosion. In this protocol, the lengths of similar riverbanks are first defined as a uniform section of bank. These uniform sections can be identified due to differences in bank slope, differences in bank material and a break in vegetation. The characteristics of uniform sections are then evaluated in a pre-screening questionnaire consisting of six questions. If the answer to two or more questions is "yes", there is a high probability of erosion and the BEHI evaluation will be performed. Otherwise, the measurement will not be taken because the erosion is low or very low.
Result and discussion
The study area was divided into four reaches and 36 sites were surveyed. These river reaches have a deep bed (incised), high slope, low sinuosity, low width to depth ratio and predominant cobble sediments in the bed. They are in type A3 according to the Rosgen River classification. The height of the banks of the stream is high and its average is 2.6 meters with a minimum and a maximum of 0.4 to 9.7 meters. The average height of bankfull was 0.44 meters and varied from 0.15 to 0.85 meters. Hence, the ratio of bank height to bankfull height has been high. The root depth of plants was low and their average was 0.34 meters. Root density of plants was also low and averaged 5.7% The stream bank angle is measured from 31 to 90 degrees and an average of 51degree. The percentage of surface protection varied between 25 and 65% and averaged 42%. From a total of 36 sites, 8% are in the medium group, 39% in the high erosion category, 45% in the very high erosion group and 8% in the extreme erosion category.
Among the various variables, the β coefficients of the surface protection index and the ratio of bank height to bankfull height were -0.62 and 0.51, respectively. To evaluate the modified BEHI method, all reaches were first examined according to the pre-screening table and more than two "yes" answers were confirmed for each reach. In the modified BEHI method, 26 out of 36 sites were in the erosion group. But in the original BEHI method, 16 sites are in a very high class. The total score of the studied sites was evaluated by two BEHI methods with Pearson correlation coefficients, which obtained a coefficient of 0.21 and shows a relatively low correlation.
Conclusion
Sajadrood stream has high and steep banks due to the incision created in the channel bed. The deposition of large boulders at the toe of the streambank has caused its protection and the flood currents of bankfull are not able to carry this piece of rock. Under these conditions, calculating the ratio of bank height to bankfull height cannot indicate the erodibility of the streambank in the bankfull stage. Nevertheless, the erodible potential of the bank for larger flood currents is confirmed. Comparison of the original BEHI with the modified BEHI showed that the modified method has an overestimate than the original BEHI.

Key word: river bank erosion, BEHI, Sajadroud, Mazandaran
 

---

Application of multivariate techniques in-line with spatial regionalization of AOD over Iran

Introduction
Models, satellites and terrestrial datasets have been used to detect and characterize aerosol. Nontheless, micoscale classification using remote sensing parameters considers as a deficiency. Thus, regionalizion and modeling aerosol without regard to political boundaries or a specific stations over Iran  demonstrates the spatial distribution of simple AOD structures.
Materials and methods
 Present study attempted to simulate and detect homogeneous areaes of aerosol in Iran using AOD (areosol optical depth) datast at 550 nm across Iran. Among the eigen techniques, principal component analysis (PCA) is the most applicable and controversial classification applied as multivariate analysis approach. In the line of the target, PCA, S-Mode separate the AOD subgroups with similar correlations. In the mode, m time series apply to each n station or grid points as a variable in the analysis, which is the territory of the region or geographical area. Mathematically, if the input data column in the Z matrix is applied as mathematical variables and the Z matrix has n points in the time series and m is the time step, then in the Zs decomposition has 3654×9985. In addition, the scree test and North's rule were used to cut-off the principal components and to select the number of appropriate special vectors to be kept.
Results and Discussion
For the study purpose, 85 percentaile of loadings were used to determine AOD areas over Iran. Using the method, the spatial patterns of Iran's aerosolshave been divided into six subregions, which are the major centers affected by the AOD. These major AOD hotspots affect by AOD extermes that are originated from aerosol surrounding sources. So that, the geographical location of sources areas have caused the northeastern atmosphere of Iran to be influenced by severe storms originating from the Karakum Desert. The same is correct concerning the East and Southeast regions. While, the intensification and transfer of aerosol from the Sistan plain to the south is increased AOD load over southeast Iran. Moreover, this study revealed a set points associated with distinguishing spatial differences between the west-northwest and southwest regions as well as central region that have not addressed in previous studies because of focus on ground-based observations. Also, the method illustrated that formation of the identified regions are a function of the volume, growth, and spread of aerosol particles resulting from the source regions in the Middle East. Finally, the classification techniques converting dynamic phenomenon such as aerosol into simpler structures presented a interpretable understanding of the geographical distribution of the phenomenon.
Conclusion
The present study identified the spatial patterns of AOD hotspots into six distinct regions including northeast, west-northwest, southeast, southwest, central and eastern Iran affected by the aerosol as well as major centers or high gradient areas. In addition, the present study not only supported by previous studies, but also it  make sense a regionalization that was neglected by former studies, whileseperated  the boundaries of the AOD areas without considering  provincial boundaries. Overall, the classification techniques, PCA, simplified a dynamic phenomenon such as aerosol into a simpler and illustrated geographical and interpretable understanding of the spatial distribution of the phenomenon.

Keywords: Aerosol Optical Depth (AOD), Multivariate Techniques, Regionalization, Iran
 

---

Introduction
Climate change is the greatest price society is paying for decades of environmental neglect. The impact of global warming is most visible in the rising threat of climate-related natural disasters. Globally, meteorological disasters more than doubled, from an average of forty-five events a year to almost 120 events a year (Vinod, 2017). Climate change refers to changes in the distributional properties of climate characteristics like temperature and precipitation that persist across decades (Field et al., 2014). Because precipitation is related to temperature, scientists often focus on changes in global temperature as an indicator of climate change. Valipour et al. (2021) reported the mean of monthly the global mean surface temperature (GMST) anomalies in 2000–2019 is 0.54 C higher than that in 1961–1990. Many studies have been done on climate change in Iran. These studies have mostly studied the mean and extreme temperature trends (Alijani et al., 2011; Masoudian and Darand, 2012). In general, the results of previous studies showed that the statistics of mean, maximum and minimum air temperature in most parts of the Iranian plateau have increased in recent decades. Also, the increase of minimum temperature is greater than maximum temperature.
A review of the research background shows that we need to understand more about regional climate change in Iran. Therefore, present study performs the climate change of 14 extreme temperature indices using multivariate statistical methods at the regional scale.

Data and methodology
Historical climate observations including daily maximum and minimum temperature were obtained from the Iranian Meteorology Organization for the period 1968 to 2017 at 39 stations. In this paper, 14 extreme temperature indices defined by ETCCDI were analyzed. The indices are as follows: (1) Annual maxima of daily maximum temperature (TXx); (2) Annual maxima of daily minimum temperature (TNx); (3) Annual minima of daily maximum temperature (TXn); (4) Annual minima of daily minimum temperature (TNn); (5) Cold nights (TN10p); (6) Cold days (TX10p); (7) Warm night (TN90p); (8) Warm day (TX90p); (9) Frost days (FD); (10) Icing days (ID); (11) Summer day (SU); (12) Tropical nights (TR); (13) The warm spell duration index (WSDI) and (14) the cold spell duration index (CSDI). The extreme temperature indices were extracted using R software environment, RclimDex extension. The Mann–Kendall Test and Sen’s Slope Method was employed to assess the trends in 14 extreme temperature indices. To identify homogeneous groups of stations with similar annual thermal regimes, Principal Component analysis (PCA) and Clustering (CL) was applied. Pearson correlation coefficient was used to investigate the relationship between height and trend slope.

Result
All the extreme temperature intensity indices (TXx, TNx, TXn, and TNn) showed increasing trends during 1968 to 2017. The increasing trends of TXx, TNx, TXn, and TNn were 0.2, 0.3, 0.44, and 0.5 ° C per decade, respectively. These results indicated that the extreme warm events increased and the extreme cold events decreased. The average of the extreme temperature frequency indices over Iran showed that the frequency of warm night (TN90p) and warm day (TX90p) significantly increased with a rate of 6.9 and 4.2 day per decade, respectively. Also, the frequency of cold night (TN10p) and cold day (TX10p) significantly fell with a decrease rate of 3.8 and 3.8 day per decade, respectively. The frequency of warm nights (TN90p) was higher than that of warm days (TX90p). The result indicated that the trend of nighttime extremes were stronger than those for daytime extremes. The average of frost days (FD) and icing days (ID) indices over Iran showed decreasing trends during 1968 to 2017 with rates of 3 and 1.1 d per decade, respectively. While, the averaged of summer days (SU) and tropical days (TR) indices over Iran showed increasing trends with rates of 4.4 and 6.4 day per decade, respectively. The warm spell duration index (WSDI) indices showed a clear increase, with a rate of 2.1 per decade. In contrast the cold spell duration index (CSDI) showed a significant decrease, with a rate of 1.7 per decade. In general, the cold indices displayed decreasing trends, whereas the warm indices displayed increasing trends over most of Iran. Pearson correlation coefficient between height and Sen’s Slope was estimated to be equal to -0.62 (p < 0.01). In general, the results of this study showed that there is a negative correlation between the elevation factor and the Sen’s Slope of warm extreme indices. That is, as the altitude decreases, the Sen’s Slope increases. Therefore, the stations located in low altitude have experienced stronger increasing trends than in high altitude. The area of ​​Iran was classified into four clusters using PCA and CL methods. Cluster 1 has experienced the strongest increasing trends. The average height of cluster 1 is 535 meters. Approximately 38% of the studied stations were located in cluster 1. Cluster 2 showed a moderate heating trends. 33% of the stations were located in cluster 2. Most of the stations of cluster 2 are located in the northwest and west of Iran. Cluster 3 showed a weak increasing trends compared to clusters 1 and 2. The stations of cluster 3 did not show a special geographical concentration and were scattered in all parts of Iran. 18% of the studied stations are located in cluster 3. The stations of Cluster 4, have experienced weak decreasing trends, which was different from the other three clusters

Conclusion
In this study we analyzed the climate change of extreme temperature indices in Iran. The result showed that the frequency of warm nights, warm days, summer days and tropical days increased. Also, the frequency of cold nights, cold days, Frost days and icing days decreased. The warm spell duration index showed a clear increase. In contrast the cold spell duration index showed a significant decrease. In general, the extreme warm events increased and the extreme cold events decreased over most of Iran. There is a negative correlation between the elevation factor and the Sen’s Slope of extreme warm indices (R = -0.62). Therefore, the stations located in low altitude have experienced stronger increasing trends than in high altitude. The area of ​​Iran was classified into four clusters using PCA and CL methods. Cluster 1 has experienced the strongest increasing trends. The average height of cluster 1 is 535 meters. Therefore, the most heating have occurred in Low-lying areas of Iran. Cluster 2 and Cluster 3 showed a moderate and weak heating trends, respectively. The stations of Cluster 4, have not experienced clear trends.

Key words: climate change; Extreme temperature; clustering; Iran



 

---

Tehran metropolitan with its large population, daily migrant workforce and many students, needs to planning and designing watch/warning system to reduce the climatic problems for human health.for this purpose, we need to study the climate accurately and Since the factors affecting the climate of warm and cold periods in Iran are different, in this study , the meteorological variables of Tehran warm period (May to September 2002) turned into 4 components in Temporal Synoptic Index (TSI) using PCA Method and using P-Array and Varimax rotation.By the scores of components for each day, the clustering method (in ward method) were used and, the warm days of the year was divided into two cluster named favorable and oppressive airmasses. The average maximum air temperature that is more effective in mortality, was 36.13 ° C. Days with temperatures above  34 ° C, less pressure, mild winds , dryness and more sunshine resulted in more adverse weather conditions, which resulted in a 34% increasing in mortality compare with favorable weather. The total number of deaths from cardiovascular disease during the study period was 154046 that about  67%of deaths have been simultaneous with oppressive airmass.The epidemiological study of mortality also confirms the results of previous research in this area and shows that the incidence of mortality is higher in older people as well as in men. It is clear that not all mortality can be attributed to the effects of climate, but results show that change in climatic conditions will affect on mortality and also for study the effect of climatic hazards on human health, it is better that we study the effect of all variables together on humans.

---

Iran is a country with low rainfall and high-intensity rainfall that is affected by various synoptic systems, the most important of these systems is Sudan low pressure, Therefore, recognizing the low pressures of the Sudan region is of particular importance, The purpose of this study is to gather a complete and comprehensive knowledge of the set of studies conducted about this low pressure, structure and formation and its effects on the surrounding climate. The present study was conducted using the library method and a search for authoritative scientific and research sources in connection with research on low pressure in Sudan and no data processing was performed in it. Thus, it has studied and analyzed the temporal and spatial changes of Sudan's low pressure over several years and its effect on the climate of the surrounding areas, especially Iran. In general, the results of this study can be divided into several categories, including studies on the recognition and study of Sudan low pressure, its structure and formation over time, pressure patterns affecting it at different atmospheric levels, and its effects on the climate of surrounding areas, especially Iran. Has been studied, The effect of this low pressure on seasonal and spring rainfall in Iran, snow and hail, floods, thunderstorms and also the effect of remote connection patterns on this low-pressure system have been studied, and finally, the analysis of these findings has been studied. It can be concluded that the Sudanese low-pressure system is a Low-pressure reverse in the region of Northeast Africa and southwest of the Middle East, which is strengthened and displaced in the upper levels of the Mediterranean and Subtropical jet stream and in the lower surface moisture injection from the Arabian Sea and Oman through high pressure. Saudi Arabia is inwardly the cause of severe instability in Iran and a major cause of heavy rainfall in various parts of the country.

---

Conclusion
The results showed that the length of the precipitation period in the study area is 8 months (out of 213 systems, 60 systems were recorded in January and 50 systems were recorded in December). June, July, August and December did not have a comprehensive rainfall system. The difference in height between the Mediterranean Cyclone  and the Arabian Anticyclone, i.e. the MAI index, was identified in 5 categories. The results showed that the higher the value of MAI index, the less rainfall systems and the higher the rainfall intensity. Most rainfall systems occur when the MAI index reaches 100 to 150 geopotential meters. In addition, the concentration of precipitation occurred in February when the MAI index reached 200 geopotential meters and above. In the continuation of the research, the difference between the Sudan Cyclone and Arabian Anticyclone, i.e. the SAI index, was also identified in 5 categories. The results showed that most of the systems occurred in the third category with a value of SAI index between 100 and 150 geopotential meters. Moreover, the results showed that the higher the value of the SAI index (, the lower the number of rainfall systems and the higher the average of rainfall systems.

---

Vulnerability assessment of Miangaran wetland ecosystem

To support the proper management of ecosystems, vulnerability analysis of ecosystems is very important. Vulnerability analysis of ecosystems provides information about weaknesses and capacity of the studied ecosystem for recovery after damage. Considering the degradation status of Miangaran wetland, vulnerability evaluation of this wetland is one of the most important management methods in the region. For this purpose, in this study, after identifying and evaluating the threatening factors of Miangaran wetland, these factors were scored using evaluation matrices. Then, the interaction between these values ​​and threatening factors was examined and the vulnerability of wetland values ​​was obtained by multiplying the scores of all studied factors. Finally, management solutions were presented to deal with the most important threatening factors. According to the results, the most vulnerability is to the hydrological and ecological values ​​of the wetland. The highest effects of threats on the ecological value are also on the birds of Miangaran wetland. The results of the evaluation of Miangaran Wetland show that this wetland has a high potential for ecosystem functions of the wetland. These functions have been neglected in the planning and managing of wetlands at the local, regional and national levels. As a result, ecosystem-based management is suggested as the best management approach. The management in these areas should take action to prevent the vulnerability of Miangaran wetland. Also, the vulnerability evaluation method used in this study can provide a good understanding of the relationship between wetland functions and the resulting services for the management of the ecosystem of Miangaran Wetland.
Key words: Miangaran wetland, ecosystem management, vulnerability assessment

---

Pandemic Covid-19 (Corona); Tehran's resilience against it

Nader Shohani; Assistant Professor, Department of Geography and Urban Planning, Payame Noor University. Tehran Iran
Lotfali College Potter; Associate Professor, Department of Geography and Urban Planning, Shahid Beheshti University, Tehran, Iran
Sajjad Darabi; PhD Student, Department of Geography and Urban Planning, Shahid Beheshti University, Tehran, Iran
Saeed Yousefi Babadi; PhD student, Department of Geography and Urban Planning, Shahid Beheshti University, Tehran, Iran

Abstract
One of the dangers that has caused cities to face a serious crisis is the outbreak of Covid-19 disease. The corona pandemic has taken cities out of their normal routine. Therefore, cities seek to return to their past conditions and urban resilience as soon as possible. Research Method In this descriptive-analytical study, using field survey, four economic, social, managerial-institutional and infrastructural dimensions in the form of 29 items have examined the resilience of Tehran against Corona pandemic. In research, support and advocacy for affected businesses, insurance coverage, support for affected manufacturing sectors, are in the most unfavorable situation. The results obtained from the final table of Vikor technique show that the economic index with a score of 1 is the most important component of resilience against coronavirus, which is lower than other components of resilience. After that, the managerial-institutional component with a score of 0.94 and the infrastructure component with a score of 0.92 in the next ranks are the most important components of Tehran's resilience against coronavirus. The results show that the metropolis of Tehran is not in a favorable position in relation to the corona virus and is not resilient to selected indicators and the economic index has the most impact and the social index has the least impact on the resilience of Tehran.

Keywords: Urban Resilience, Covid 19, Pandemic, Tehran



Pandemic Covid-19 (Corona);
Tehran's resilience against it