Journal of Spatial Analysis

---

Flood pron areas of rivers are generally hazardous. Regionalizing these hazardous areas in terms of the degree of hazard they produce is very important for regional flood management, insurance companies and land users. Therefore, this research has tried to regionalize the potential hazard of the flood prone areas of the Morghak River using HEC-GeoRAS model as an example for all flood plains of Gillan province.

    In order to develop the hydrolic model of the river, the following data were prepared.

• The river profile, roughness index of the river channel and flood plain and river bank conditions were obtained from 1:2000 TIN maps.
• The data were entered into the HEC-RAS model.
• Then the data of the river banks and flood discharge amounts were entered and hydraulic computations were carried out.
• The model results were entered into the GIS. After the requested processing in the extension of HEC-GeoRas431, the final maps of depth of river, water movement velocity, shear velocity and the flow intensity along the river channel were produced.
• The maps were moved into the Google Earth and the flood area with different return periods were plotted.

    The results showed the areal expansion of the 25-year return period floods of the river basin. This plain is narrow in the upper areas of the river and widens in the lower areas of the area. In the areas that there are constructions, the basin gets wider and its higher discharges causes severe hazards in the settlements around the river. The widest part of the flood plain is over the lowlands around Anzali swamp. In these lowlands the flood spreads over the vast area and making problems for the farmers and dwellers.

    According to the results of this research some adaptation measures are needed in the areas where people have moved to the river channel and have built some structures. Some of these measures include vegetation planting, cement and rocky barriers and cleaning all extra wastes. The results of the study also indicate that in most of the branches the building of the channel has narrowed the channel and caused flood in the settled areas. The physiographic parameters of the river have seriously been changed and caused the severe floods in the river especially in the lower areas. The flow speed of the river changes from 4.1 m/s in the maximum discharge to .2 m/s in the very low discharge. The width of the channel has also changed from 281 meters in the maximum to 11 meters at the low discharge period. The discharge stress was between .3 to 357 newtons the overall results of the research indicate that the human interference in the river basin has caused all these hazards. And the only solution is that the humans should go out of the risky areas of the river basin. The continuation of this process in this river or in the other rivers will worsen the present hazards,

---

Simulation of floodplain zones in Tehran's metropolitan watershed (case study: Kaan basin)
Ezaatollah Ghanavati, Associate prof. Geographical science faculty, Kharzmi University
Ali Ahmmadabadi. Assistance prof. Geographical science faculty, Kharzmi University
Negar Gholami, MA in Geomorphology, Geographical science faculty, Kharzmi University
Extended abstract
Floodplains and adjacent rivers are always at risk from flood events due to their specific circumstances. Flood prone area identification in the watersheds is one of the basic solutions for destructive flood control and mitigation. Flood mapping is one of the best methods for flood prone area planning and identifying. Considering the importance of flood hazard, it is important to understand the role of uncertainty and incorporate that information in flood hazard maps. The hydrodynamic modeling approach is suitable for accounting various uncertainties, and thus lends itself to creating probabilistic floodplain maps. For  this purpose,  flow  boundary  conditions,  peak  instantaneous  discharge with  different  return  periods,  cross  sections and their distance and roughness coefficients for each cross section were entered to HEC-RAS hydraulic model in Kaan watershed  located  in  the Tehran  province,  Iran,  and  this model was  then  run  and  flood water surface profile at different return periods were estimated. In the Kaan Basin, most residential and agricultural lands are located in a very small distance from the river bed. The rapid growth of construction, human activities and land use change in the downstream of the basin have caused a change in the hydrological cycle and runoff production. Floodplain mapping using hydrodynamic models is difficult in data scarce regions. Additionally, using hydrodynamic models to map floodplain over large stream network can be computationally challenging. Some of these limitations of floodplain mapping using hydrodynamic modeling can be overcome by developing computationally efficient statistical methods to identify floodplains in large and ungauged watersheds using publicly.
The aim of this study is to determine flood areas within 20 kilometers of the Kaan River by using the HEC-RAS model and Arc GIS software to identify flood lands in different return periods.
The Kaan basin is located in the central Alborz Mountains. This basin is limited to south, north, east and the west respectively to Tehran, Jajrood Basin, Darakeh Basin and Karaj River Basin. The most important River in the area is the Kaan River and originated from high mountains.
Most commonly, the hydrodynamic modeling approach is used to create flood hazard maps corresponding to a rare high flood magnitude of 100-year return period or higher. Although this approach can provide very accurate floodplain maps, it is computationally demanding. As a result, the modeling approach to flood hazard mapping works well for individual streams, but its efficiency drops significantly when used to map floodplains over a large stream network. In this research, floodplain areas in the Kaan basin in return periods of 2 to 20 years are determined using the HEC-RAS model and the HEC-geoRAS extension. For this purpose, digital maps 1: 25000, DEM (10m), discharge values of Sulaghan Station, morphological characteristics of the river bed and cross sections have been used. Digital Elevation Models (DEMs) play a critical role in flood inundation mapping by providing floodplain topography as input to hydrodynamic models, and then enabling the mapping of the floodplain by using the resulting water surface elevations. Finally, the data is entered into the HEC-RAS software and analyzed. After determining the flood ranges in the various return periods at each cross-section, enter the results to the Arc GIS software and the flood zoning maps were obtained.
In this research roughness coefficients (Maning^,s coefficients) for each cross section were obtain be the
n= (nb+n1+n2+n3+n4) m                                                             (Eq.1)
Geological map and field observations have shown that the main difference between the widths of the valley in the study area is related to the type of rock. The results of the hydrodynamic model show that in the river upstream, the increase in discharge had led to the water level increase and expansion in the floodplain surfaces. But in the middle and low slopes in the downstream of the river, due to the reduced discharge, the river has a larger lateral extension and the flood areas are larger than the upstream of the river. Also, for a longer period of return, the discharge rate and the water level increase and the flood plain was more extensive. The results show that in the downstream of the basin due to instability the bed, existence of wide and eroded chanels, high ability in sedimentation, erosion of the channel bed, and low impact of vegetation, this section They can be restored and regenerated and constantly changing. Due to the location the Tehran-North high way from the Kaan basin, had the construction of roads and structures, the flood plain areas of the river should be fully observed or retrofitted.
 
Key words: Environmental hazards, Flood, Flood areas, Kaan River, HEC-RAS
 
 
 
.