AU - Boroushak, N AU - Khoshnoodi, H AU - Daneshmandy, H AU - Eslami, M TI - Designing and simulating of helmet evaluation machine in martial arts based on dynamic’s criterias PT - JOURNAL ARTICLE TA - Research-in-Sport-Medicine-and-Technology JN - Research-in-Sport-Medicine-and-Technology VO - 17 VI - 17 IP - 17 4099 - http://jsmt.khu.ac.ir/article-1-363-en.html 4100 - http://jsmt.khu.ac.ir/article-1-363-en.pdf SO - Research-in-Sport-Medicine-and-Technology 17 AB  - Nowadays there is no specific and effective standard for evaluating the helmets in martial arts which it has caused a lot of brain damages. The purpose of this study was designing and modeling a helmet assessment machine in martial arts, based on dynamic’s parameters and criteria. SolidWorks, Adams and Catia softwares were used for designing this machine. Also, In order to build this machine, an artificial head that equipped with force and acceleration sensors and a mechanical arm for applying impact to the head were used. The validation of the machine was done by comparing its results (impact force, linear acceleration and rotational acceleration) with the results obtained from the simulated model in the computer. The Pearson correlation coefficient of 0.9 that obtained from this comparison indicates that the results of this machine are correct. To confirm the reliability of the machine, an Intraclass Correlations was used, the results showed values of 0.7 and greater than that and it also confirmed the appropriate repeatability of the machine. According to the results of this study, due to the considering the important parameters of linear and rotational acceleration and the impact force in evaluating helmets and investigating the mechanism of head injury in the conditions close to competition ones, the device can be an appropriate equipment for more accurate measurement of helmets in martial arts. CP - IRAN IN - LG - eng PB - Research-in-Sport-Medicine-and-Technology PG - 37 PT - Research YR - 2019