Volume 9, Issue 3 (12-2015)
2015, 9(3): 2941-2960 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Davoodi M, Ghanbari A, Abedini S. Estimating the Variable Horizontal Acceleration Coefficient in Height of Embankment Dams Considering Dam Flexibility and Reservoir Elevations. Journal of Engineering Geology 2015; 9 (3) :2941-2960
URL: http://jeg.khu.ac.ir/article-1-1710-en.html
URL: http://jeg.khu.ac.ir/article-1-1710-en.html
1- , m-davood@iiees.ac.ir
Abstract: (6864 Views)
The pseudo-static analysis is one of the conventional methods in embankment dams design and International Commission on Large Dams (ICOLD) suggests using this method before ultimate dynamic analyses. In this research, the static, pseudo-static and dynamic analysis of Masjed Soleyman embankment dam was performed. Using dynamic and pseudo-static analyses results, the safety factor of critical sliding surface was calculated. Permanent displacements of critical sliding surface were evaluated by New mark method and the calculated safety factor was compared. Based on the comparison results in different water levels of the reservoir and by introducing a new equation, the variable horizontal acceleration coefficients in height of the dam body were calculated. Finally, the obtained horizontal acceleration coefficients were compared with the other criteria introduced in different embankment dam's design codes. Totally, the results indicate that the proposed method leads to a larger horizontal acceleration coefficient in higher parts of the dam body.
Keywords: embankment dams, horizontal acceleration coefficients, pseudo-static analysis, dynamic analysis
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
