Volume 1, Issue 3 (انگلیسی از صفحه 271 تا 280 2004)                   2004, 1(3): 271-280 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Assessment of Schmidt rebound Hammer for Determination of Uniaxial Compressive Strength. Journal of Engineering Geology 2004; 1 (3) :271-280
URL: http://jeg.khu.ac.ir/article-1-314-en.html
Assessment of Schmidt rebound Hammer for Determination of Uniaxial Compressive Strength
Abstract:   (6063 Views)
The paper discusses the application of the L-type Schmidt rebound hammer for determination of the uniaxial compressive strength of discontinuity surfaces of rock masses. The result revealed that there is no correlation between L-type rebound hammer values and uniaxial compressive strength, if it is applied on natural rough joint surfaces under saturated conditions.
Keywords: Rebound hammer, uniaxial compressive strength, Discontinuity surface
Full-Text [PDF 286 kb]   (3146 Downloads)    

Accepted: 2016/10/5 | Published: 2016/10/5
Add your comments about this article : Your username or Email:
CAPTCHA
Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb